The ceramic substrate of the ozone generating plate produced by our company is composed of 96% AL2O3. The printing paste is an imported paste mainly made of high-temperature-resistant metals. It is sintered at a high temperature of 850 ° C, and the surface of the sheet is covered with a layer of insulating film. It can prevent the moisture in the air from eroding the surface of the electrode, so that the ozone sheet electrode is isolated from the outside world, which enhances the product's high temperature resistance, moisture resistance and prolongs its service life.

Specification

Application of ozone plate

• Drinking Water Disinfection
• Livestock Drinking Water Disinfection
• Pharmaceutical / Hospital Water Disinfection Tertiary Sewage Water treatment- Disinfection RAS - Recirculatory Aqua Culture • System Aqua Culture
• Agriculture, Hydrophonics & Aquaphonics Swimmingpool Water Disinfection
• Fish, Meat, Fruits & Vegetables Processing Alternative Medical Therapy

Ozone generator for water treatment

The working principle of the ozone generator for water treatment: mainly use high-voltage discharge, electrolyze oxygen, generate strong oxide ozone, use the strong oxidative property of ozone to decompose pollutants, so that water treatment can achieve sterilization, deodorization, decolorization, COD reduction, etc.

Ozone cannot be stored and transported like other industrial gases because it quickly decays into oxygen.

Therefore Ozone must be produced on site.

Ozone is most commonly produced through the corona discharge method. In this method, oxygen molecules (O2) are passed between two electrodes. An electrical charge is then applied to the electrodes which causes some of the oxygen molecules to split apart and temporarily combine with other oxygen molecules making a molecule of three oxygen atoms (O3).

How to identify the quality of the ozone generator?

The quality of water treatment ozone generator can be identified from the aspects of manufacturing materials, system configuration, cooling method, working frequency, control method, ozone concentration, gas source and power consumption indicators.

How to choose the water treatment ozone generator?

Choose the size of the corresponding ozone output according to the disinfection water flow per hour.

For places with higher requirements, a high-concentration ozone generator should also be selected for air treatment. 20-50mg/m3 is used for air treatment, and the food and drug industry chooses high value. According to the conversion of the size of the space, the total usage of ozone (the output of the ozone generator) can be obtained. When used for water treatment, a high-concentration ozone generator must be purchased (the ozone concentration exceeds 12 mg/L), and low-concentration ozone is ineffective for water treatment.