Stainless Steel Sheet 304 304l 316 430 Stainless Steel Plate S32305
904L 4X8 Ft SS Stainless Steel Sheet Plate Board
Product description
| Name | Stainless Steel Sheet 304 304l 316 430 Stainless Steel Plate S32305
904L 4X8 Ft SS Stainless Steel Sheet Plate Board |
| Grade | 304 304l 316 430... |
| Technology | Cold Rolling |
| Surface | 2b,8k,BA,No.4,No.8, Mirror... |
| Thinkness | Cold Rolled:0.3mm-4mm |
| Width | 1000mm, 1220mm... |
| Packing | Export sea worthy package |
| Sample | Free! |
| MOQ | 20 KGS |
| Payment | TT, L/C |
| Delivery | 5-7 days |
Stainless Steel Surface Treatments
1D—The surface has discontinuous particles, which is also called
matte. Processing technology: hot rolling + annealing shot peening
pickling + cold rolling + annealing pickling.
2D—Slightly shiny silver-white. Processing technology: hot rolling
+ annealing shot peening pickling + cold rolling + annealing
pickling.
2B—Silver white and better gloss and flatness than 2D surface.
Processing technology: hot rolling + annealing shot peening
pickling + cold rolling + annealing pickling + quenching and
tempering rolling.
BA—The surface gloss is excellent and has a high reflectivity, just
like the mirror surface. Processing technology: hot rolling +
annealing shot peening pickling + cold rolling + annealing pickling
+ surface polishing + quenched and tempered rolling.
No.3—has better gloss and rough surface. Processing technology:
Polishing and tempering rolling of 2D products or 2B with 100 ~ 120
abrasive materials.
No.4—has better gloss and fine lines on the surface. Processing
technology: Polishing and tempering rolling of 2D products or 2B
with 150 ~ 180 abrasive materials.
HL—Silver gray with hair streaks. Processing technology: Polish the
2D product or 2B product with a suitable size of abrasive material
to make the surface appear continuous grain.
MIRROR Machining —is in a mirror state. Processing technology: 2D
or 2B products are ground and polished to a mirror effect with a
suitable abrasive material.
Corresponding photo of stainless steel surface treatment
Stainless Steel Composition Contents Proportion Table
| 200 series |
| Grade | chemical composition (%) | mechanic performances |
| C | Si | Mn | P | S | Ni | Cr | N | Cu | Y.S(N/mm2) | T.S(N/mm2) | Elog(%) | HRB |
| 201(1%nickel) | ≤0.15 | ≤1.00 | 8∽11 | ≤0.060 | ≤0.030 | 0.9∽1.5 | 15∽17 | ≤0.25 | 1.5∽2 | ≥310 | ≥655 | ≥35 | ≤105 |
| 202(4%nickel) | ≤0.15 | ≤1.00 | 6∽9 | ≤0.060 | ≤0.030 | 3.5∽5 | 15∽17 | ≤0.25 | 1.5∽2 | ≥260 | ≥620 | ≥40 | ≤100 |
| The specification of type 201&202 in conformity with Mill
Standard |
| 300 series |
| Grade | chemical composition (%) | mechanic performances |
| C | Si | Mn | P | S | Ni | Cr | Mo | | Y.S(N/mm2) | T.S(N/mm2) | Elog(%) | HRB |
| 304 | ≤0.08 | ≤0.75 | ≤2 | ≤0.045 | ≤0.030 | 8∽10 | 18∽20 | | | ≥205 | ≥520 | ≥40 | ≤90 |
| 301 | ≤0.15 | ≤1.00 | ≤2 | ≤0.045 | ≤0.030 | 6∽8 | 16∽18 | | | ≥205 | ≥515 | ≥40 | ≤95 |
| 316 | ≤0.08 | ≤1.00 | ≤2 | ≤0.045 | ≤0.030 | 10∽14 | 16∽18 | 2∽3 | | ≥205 | ≥515 | ≥40 | ≤90 |
| 316L | ≤0.03 | ≤1.00 | ≤2 | ≤0.045 | ≤0.030 | 12∽15 | 16∽18 | 2∽3 | | ≥170 | ≥480 | ≥40 | ≤95 |
| The specification of type
301,302,304,304L,309S,310S,316,316L,321,347 in conformity with ASTM
& JIS criteria |
| 400 series |
| Grade | chemical composition (%) | mechanic performances |
| C | Si | Mn | P | S | Ni | Cr | Mo | | Y.S(N/mm2) | T.S(N/mm2) | Elog(%) | HRB |
| 430 | ≤0.12 | ≤1.00 | ≤1 | ≤0.040 | ≤0.030 | | 16∽18 | | | ≥450 | ≥205 | ≥22 | ≤88 |
| The specification of type 430,410,420J1.420J2 in conformity with
ASTM & JIS criteria |
| 630 series |
| Grade | chemical composition (%) | mechanic performances |
| C | Si | Mn | P | S | Ni | Cr | Mo | Nb | Y.S(N/mm2) | T.S(N/mm2) | Elog(%) | HRB |
| 630 | ≤0.07 | ≤1.00 | ≤1.00 | ≤0.035 | ≤0.030 | 6.50∽7.50 | 15.50∽17.50 | | 0.15∽0.45 | ≥450 | ≥205 | ≥22 | ≤88 |
| The specification of type 630 in conformity with ASTM & JIS
standard |
product photos
Related Products
Main Products
ⅠStainless Steel Plate.
Stainless steel plate surface is shining & polish,it has great
fabricability with toughness & mechanic strength .It can
anti-corrode acid or alkaline gas ,solution & other agents
corrosion .
Stainless steel is a kind of alloyed steel ,it’s not inclined to
rust .It has wide applications in many industries .It has many
merits in anti-corrosion ,heat-resistance ,low temperature
resistance and good performances of cold mechanic processing .
By the material divisions ,it can be divided into
201,304,304L,316L,310S,etc .
In conformity with executing criteria GB/T3280-2009 “Stainless
Steel Cold Rolled Sheet & Ribbon”.
Universal specification dimension
;1000×2000,1220×2440,1500×3000,1500×6000,
1800×6000.It also can be tailored as per fabricated pieces .
Normally international cold rolled stainless steel sheet thickness
is from 0.30-5.00 mm;
Hot rolled stainless steel plate thickness :3-16mm.Other irregular
pieces thickness can be
Tailored as per client’s special requirements .
GB/T4237-2009 “hot rolled stainless steel plate & ribbon”.
ASTM A240/240M-10 “Pressure vessel and general
purposeheat-refractory steel plate”
Π Stainless Steel Pattern Products
Many patterns available for options ,it’s suitable for stair
footplates fabrication ,or laying plant anti-corrosion ,abrasion
resistant floor
Ш Catch basin & gutter.
All kinds of dimension or thickness can be tailored as per
customer’s special requirements .
Ⅳ Stainless steel angle steel ,channel beam ,flat steel,round bar
steel ,tube,
Section bars .
Ⅴ. Stainless plate bending
Processing all kinds of irregular dimension pieces
Ⅵ. Stainless steel sheet circulating welding
Air duct production .
Ⅶ Processing capacity Leading 20000W large scale laser cutting
machine .
Cutting pieces thickness 50mm by laser is so fast ,high efficient
with full automation ,less effective on heat & local deformation
.It will be helpful in improving accuracy .It can meet the needs of
pieces processing diversities ,and can improve processing
capacities ,and aid customers to save costs .
Ⅷ. Stainless steel sheet cutting & bending .
Cutting ,bending & circulating equipment can process length 9 M
pieces .It can be
Utilized in all kinds of filling equipment ,air duct pipes .It can
provide large
Scale ,precise semi-products processing demands.
Ⅸ. Stainless steel surface processing .
Stainless steel mirror machining ,wire drawing ,plating procession
.
Ⅹ. Aluminium alloyed products .
Ⅺ.Alloyed steel
Frequently asked Questions
FAQ
Q1. Can I have a sample order for your products ?
A: Yes, we welcome sample order to test and check quality. Mixed
samples are acceptable.
Q2. What about the lead time?
A: 3-5 days for Sample preparing ,8-10 working days for mass
production.
Q3. Do you have any MOQ limit for stainless steel products ?
A: Low MOQ, 1pc for sample checking is available.
Q4. How do you ship the goods and how long does it take to arrive?
A: Ship by DHL, UPS, FedEx or TNT. It takes 3-5 days to arrive.
Airline and sea shipping also optional.
Q5. How to proceed an order for stainless steel products ?
A: Firstly let us know your requirements or application.
Secondly We quote according to your requirements or our
suggestions.
Thirdly customer confirms the samples and places deposit for formal
order.
Fourthly We are going to arrange the production.
Q6. Is it OK to print my logo on stainless products which we had
ordered before from your company ?
A: Yes. Please inform us formally before our production.
Q7: Do you offer guarantee for the products?
A: Yes, we offer 1 years warranty to our products.
Q8: How to deal with the faulty?
A: Firstly, Our products are produced in strict quality control
system and the defective rate will be less than 0.001%.
Secondly, during the guarantee period, we will send new stainless
steel products with new order for small quantity. For defective
batch products, we will recall them and resend them to you or we
can discuss the solution including re-call according to real
situation.
Q9. What main products are you ready to provide to us ?
1 stainless steel hot rolled plate
2. Stainless Steel cold rolled sheet
3. Stainless steel pipes or tubes .
4. Stainless Steel angles ,beam ,channels .
5. Stainless round bars
6. Stainless processing pieces .
7. Stainless laser cutting irregular pieces .
8. Aluminium plates
9. Alloyed steel
10. Nonferrous metals .
Q10 payment terms :
Normally we accept TT , LC , west union...
at exchanger, etc
