Stainless Steel Sheet 304 304l 316 430 Stainless Steel Plate S32305
904L 4X8 Ft SS Stainless Steel Sheet Plate Board
Product description
| Name | Stainless Steel Sheet 304 304l 316 430 Stainless Steel Plate S32305
904L 4X8 Ft SS Stainless Steel Sheet Plate Board |
| Grade | 304 304l 316 430... |
| Technology | Cold Rolling |
| Surface | 2b,8k,BA,No.4,No.8, Mirror... |
| Thinkness | Cold Rolled:0.3mm-4mm |
| Width | 1000mm, 1220mm... |
| Packing | Export sea worthy package |
| Sample | Free! |
| MOQ | 20 KGS |
| Payment | TT, L/C |
| Delivery | 5-7 days |
Stainless Steel Surface Treatments
1D—The surface has discontinuous particles, which is also called
matte. Processing technology: hot rolling + annealing shot peening
pickling + cold rolling + annealing pickling.
2D—Slightly shiny silver-white. Processing technology: hot rolling
+ annealing shot peening pickling + cold rolling + annealing
pickling.
2B—Silver white and better gloss and flatness than 2D surface.
Processing technology: hot rolling + annealing shot peening
pickling + cold rolling + annealing pickling + quenching and
tempering rolling.
BA—The surface gloss is excellent and has a high reflectivity, just
like the mirror surface. Processing technology: hot rolling +
annealing shot peening pickling + cold rolling + annealing pickling
+ surface polishing + quenched and tempered rolling.
No.3—has better gloss and rough surface. Processing technology:
Polishing and tempering rolling of 2D products or 2B with 100 ~ 120
abrasive materials.
No.4—has better gloss and fine lines on the surface. Processing
technology: Polishing and tempering rolling of 2D products or 2B
with 150 ~ 180 abrasive materials.
HL—Silver gray with hair streaks. Processing technology: Polish the
2D product or 2B product with a suitable size of abrasive material
to make the surface appear continuous grain.
MIRROR Machining —is in a mirror state. Processing technology: 2D
or 2B products are ground and polished to a mirror effect with a
suitable abrasive material.
Corresponding photo of stainless steel surface treatment
Stainless Steel Composition Contents Proportion Table
| 200 series |
| Grade | chemical composition (%) | mechanic performances |
| C | Si | Mn | P | S | Ni | Cr | N | Cu | Y.S(N/mm2) | T.S(N/mm2) | Elog(%) | HRB |
| 201(1%nickel) | ≤0.15 | ≤1.00 | 8∽11 | ≤0.060 | ≤0.030 | 0.9∽1.5 | 15∽17 | ≤0.25 | 1.5∽2 | ≥310 | ≥655 | ≥35 | ≤105 |
| 202(4%nickel) | ≤0.15 | ≤1.00 | 6∽9 | ≤0.060 | ≤0.030 | 3.5∽5 | 15∽17 | ≤0.25 | 1.5∽2 | ≥260 | ≥620 | ≥40 | ≤100 |
| The specification of type 201&202 in conformity with Mill
Standard |
| 300 series |
| Grade | chemical composition (%) | mechanic performances |
| C | Si | Mn | P | S | Ni | Cr | Mo | | Y.S(N/mm2) | T.S(N/mm2) | Elog(%) | HRB |
| 304 | ≤0.08 | ≤0.75 | ≤2 | ≤0.045 | ≤0.030 | 8∽10 | 18∽20 | | | ≥205 | ≥520 | ≥40 | ≤90 |
| 301 | ≤0.15 | ≤1.00 | ≤2 | ≤0.045 | ≤0.030 | 6∽8 | 16∽18 | | | ≥205 | ≥515 | ≥40 | ≤95 |
| 316 | ≤0.08 | ≤1.00 | ≤2 | ≤0.045 | ≤0.030 | 10∽14 | 16∽18 | 2∽3 | | ≥205 | ≥515 | ≥40 | ≤90 |
| 316L | ≤0.03 | ≤1.00 | ≤2 | ≤0.045 | ≤0.030 | 12∽15 | 16∽18 | 2∽3 | | ≥170 | ≥480 | ≥40 | ≤95 |
| The specification of type
301,302,304,304L,309S,310S,316,316L,321,347 in conformity with ASTM
& JIS criteria |
| 400 series |
| Grade | chemical composition (%) | mechanic performances |
| C | Si | Mn | P | S | Ni | Cr | Mo | | Y.S(N/mm2) | T.S(N/mm2) | Elog(%) | HRB |
| 430 | ≤0.12 | ≤1.00 | ≤1 | ≤0.040 | ≤0.030 | | 16∽18 | | | ≥450 | ≥205 | ≥22 | ≤88 |
| The specification of type 430,410,420J1.420J2 in conformity with
ASTM & JIS criteria |
| 630 series |
| Grade | chemical composition (%) | mechanic performances |
| C | Si | Mn | P | S | Ni | Cr | Mo | Nb | Y.S(N/mm2) | T.S(N/mm2) | Elog(%) | HRB |
| 630 | ≤0.07 | ≤1.00 | ≤1.00 | ≤0.035 | ≤0.030 | 6.50∽7.50 | 15.50∽17.50 | | 0.15∽0.45 | ≥450 | ≥205 | ≥22 | ≤88 |
| The specification of type 630 in conformity with ASTM & JIS
standard |
product photos
Related Products
Main Products
ⅠStainless Steel Plate.
Stainless steel plate surface is shining & polish,it has great
fabricability with toughness & mechanic strength .It can
anti-corrode acid or alkaline gas ,solution & other agents
corrosion .
Stainless steel is a kind of alloyed steel ,it’s not inclined to
rust .It has wide applications in many industries .It has many
merits in anti-corrosion ,heat-resistance ,low temperature
resistance and good performances of cold mechanic processing .
By the material divisions ,it can be divided into
201,304,304L,316L,310S,etc .
In conformity with executing criteria GB/T3280-2009 “Stainless
Steel Cold Rolled Sheet & Ribbon”.
Universal specification dimension
;1000×2000,1220×2440,1500×3000,1500×6000,
1800×6000.It also can be tailored as per fabricated pieces .
Normally international cold rolled stainless steel sheet thickness
is from 0.30-5.00 mm;
Hot rolled stainless steel plate thickness :3-16mm.Other irregular
pieces thickness can be
Tailored as per client’s special requirements .
GB/T4237-2009 “hot rolled stainless steel plate & ribbon”.
ASTM A240/240M-10 “Pressure vessel and general
purposeheat-refractory steel plate”
Π Stainless Steel Pattern Products
Many patterns available for options ,it’s suitable for stair
footplates fabrication ,or laying plant anti-corrosion ,abrasion
resistant floor
Ш Catch basin & gutter.
All kinds of dimension or thickness can be tailored as per
customer’s special requirements .
Ⅳ Stainless steel angle steel ,channel beam ,flat steel,round bar
steel ,tube,
Section bars .
Ⅴ. Stainless plate bending
Processing all kinds of irregular dimension pieces
Ⅵ. Stainless steel sheet circulating welding
Air duct production .
Ⅶ Processing capacity Leading 20000W large scale laser cutting
machine .
Cutting pieces thickness 50mm by laser is so fast ,high efficient
with full automation ,less effective on heat & local deformation
.It will be helpful in improving accuracy .It can meet the needs of
pieces processing diversities ,and can improve processing
capacities ,and aid customers to save costs .
Ⅷ. Stainless steel sheet cutting & bending .
Cutting ,bending & circulating equipment can process length 9 M
pieces .It can be
Utilized in all kinds of filling equipment ,air duct pipes .It can
provide large
Scale ,precise semi-products processing demands.
Ⅸ. Stainless steel surface processing .
Stainless steel mirror machining ,wire drawing ,plating procession
.
Ⅹ. Aluminium alloyed products .
Ⅺ.Alloyed steel
