High Productivity Automatic Drying Equipment Rotary Dryer for Brick
Making
The Rotary Drier is widely used in the field of building materials,
metallurgies, chemical industry, cement and so on.
The Rotary Drier is widely used in the field of building materials,
metallurgies, chemical industry, cement and so on. It can dry slag,
coal powder, mining powder, clay, sand, limestone and so on. It is
made of rotary body, lifting blade, driving device, supporting
device etc. The dryer has advantages of reasonable structure, high
efficiency, low energy consumption and convenient for
transportation.
It is a drying machine used to dispose masses of materials. Single
drum dryer is widely used in the field of building materials,
metallurgies, chemical industry, cement and so on. it can dry slag,
coal powder, mining powder, clay, sand, limestone and so on. It is
made into rotary body, lifting blade, driving device, supporting
device etc. It adopt the reasonable operation parameters and it
also reduce the coal and power consumption by more than 10- 15%
increases the output by more than 10- 15% compared with the general
dryers.
| Model | Spec.
(Dia.x Length) (mm) | Volume
(m³) | Capacity (t/h) | Gradient
(%) | Highest Inlet Air
Temperature
(℃) | Rotate Speed
(r/min) | Main Motor
(kw) |
| KL-RD600x6000 | Φ600x6000 | 1.7 | 0.5-1.5 | 3~5 | 700~800 | 3~8 | 3 |
| KL-RD800x8000 | Φ800x8000 | 4.1 | 0.8-2.0 | 3~5 | 700~800 | 3~8 | 4 |
| KL-RD800x10000 | Φ800x10000 | 5.1 | 0.8-2.5 | 3~5 | 700~800 | 3~8 | 4 |
| KL-RD1000x10000 | Φ1000x10000 | 7.9 | 1.0-3.0 | 3~5 | 700~800 | 3~8 | 7.5 |
| KL-RD1000x12000 | Φ1000x12000 | 9.4 | 1.2-3.2 | 3~5 | 700~800 | 3~8 | 11 |
| KL-RD1200x8000 | Φ1200x8000 | 9 | 1.9-2.4 | 3~5 | 700~800 | 3~8 | 7.5 |
| KL-RD1200x10000 | Φ1200x10000 | 11.3 | 2.2-3.0 | 3~5 | 700~800 | 3~8 | 7.5 |
| KL-RD1200x12000 | Φ1200x12000 | 13.6 | 2.4-3.2 | 3~5 | 700~800 | 3~8 | 7.5 |
| KL-RD1500x12000 | Φ1500x12000 | 21.2 | 4.5-5.7 | 3~5 | 700~800 | 2~6 | 15 |
| KL-RD1500x14000 | Φ1500x14000 | 24.7 | 5.3-6.6 | 3~5 | 700~800 | 2~6 | 15 |
| KL-RD1500x16000 | Φ1500x16000 | 26.5 | 5.7-7.1 | 3~5 | 700~800 | 2~6 | 15 |
| KL-RD1800x12000 | Φ1800x12000 | 30.5 | 6.5-8.1 | 3~5 | 700~800 | 2~6 | 18.5 |
| KL-RD1800x14000 | Φ1800x14000 | 35.6 | 7.6-9.5 | 3~5 | 700~800 | 2~6 | 18.5 |
| KL-RD1800x16000 | Φ1800x16000 | 40.7 | 7.8-10.2 | 3~5 | 700~800 | 2~6 | 18.5 |
| KL-RD2000x18000 | Φ2000x18000 | 56.5 | 8.4-12.3 | 3~5 | 700~800 | 1.5~6 | 22 |
Working principle
1.The material first goes into the inside drum, because there are
the spiral shape boards fixed in the drum, when the dryer make
rotary working, the spiral shape board will stir the material and
make the material do movement.
2.When the material reaches the right side of the drum, it will go
into the second drum for further drying.
3.The same working principle, the material then goes into outside
drum, during the drying working process, the material will make
three times drying, so the material can be dried completely in this
process.
