Professional Fractional Co2 Laser Machine / Co2 Fractional Laser
Machine Skin Resurfacing
Product Description:
Fractional Co2 Laser Skin Resurfacing tightening laser is the use of water uptake 10600nm gold standard laser, using a three-dimensional lattice technology and 360-degree circular
emission perfect combination of technology, to produce 50-70 degrees Celsius in a controlled
depth of the Skin Resurfacing mucosa, stimulate lamina propria and myometrium newborn
fibroblasts, and damaged collagen fibers, elastic fibers, such as
restructuring, so as to achieve Skin Resurfacing wall thickening and tighteningof the Skin Resurfacing so that firmness, sensitivity enhancement, Skin Resurfacing tight as ever.
Skin Resurfacing tightening laser does not produce skin burns due to high temperature, each capable
of Homogeneous heat, acting on a few hundred nanometers thickness Mucosa
organization.
thermal radiation make Mucosa tissue contraction and collagen
fibers thereby improving and restructuring Skin Resurfacing tightening.
1. Shrink Skin Resurfacing rapid tightening, constriction, lasting firmness.
2. Beautify Skin Resurfacing: dilute pigment, pink labia.
3. Moist Skin Resurfacing: increase secretion, eliminate dryness.
4. Maintenance Skin Resurfacing: deep rejuvenation, prevent aging.
5. To improve sensitivity.
6. Private health, balance PH, improve the internal environment.
product display:
Technical Specification
| Working mode | Single pulse, continuous pulse, repeated pulse |
| Output power | 60w (adjustable) |
| Input power | 450VA |
| Laser type | Sealed-off CO2 laser tube/ RF laser tube |
| Laser wavelength | 10.6μm |
| Scan Pattern | triangle/square/rectangle/diamond /line/round |
| Beam divergence angle | 4mrad |
| Focused spot diameter | ≤0.4mm |
| Pulse width | 0.02-0.99s |
| Aiming beam | infrared ray (650nm, 2mw) |
| Beam Delivery | 7 joint-articulated arms |
| Cooling system | Inside-circle coolant |
| Display screen | True color touch LCD screen |
| Operation system | Microcomputer control |
| Humidity | <80% |
| Air pressure | 86KPA-106 KPA |
| Input voltage | AC220V±10%, 50Hz |
| Preheating-time | >5min |
| Electromagnet | No electromagnet interrupt |
| Other working environments | No obvious shaking or airflow |
Before&after:
Company information:
