Plug in tuning fork density meter with digial display tuning fork
sensor
Description Plug in tuning fork density meter with digial display tuning fork
sensor
The XY-886 tuning fork density meter is a high-precision, highly
applicable vibration principle density meter produced by
introducing the most advanced frequency tracking technology from
abroad. The product design adopts plug-in installation and is
widely used in pipelines, open tanks and closed containers.
Detection of the density of the medium in the tank.
The tuning fork densitometer sensor is composed of two
piezoelectric crystals. One piezoelectric crystal generates
vibration, and the other piezoelectric crystal detects vibration.
The tuning fork sensor has a built-in temperature sensor to
compensate the vibration of the piezoelectric crystal.
Application Plug in tuning fork density meter with digial display tuning fork
sensor
Typical industries include, petrochemical industry, brewing
industry, food industry, pharmaceutical industry and mineral
processing (such as clay, carbonate, silicate, etc.) density
detection, reactor end point monitoring, and separator interface
detection.
Specification Plug in tuning fork density meter with digial display tuning fork
sensor
| Measuring range | 0~3 g/cm³ optional |
| Output | 4-20 mA signal (4-wire system) |
| Accuracy | 0.3% (real-time range) or 0.001 g/cm³, whichever is greater. |
| Resolution | 0.0001 g/cm³ |
| Installation method | DN50 DN80 DN100 and threaded installation (threaded installation
with mounting base) |
| Scope of application | -30~120 degrees |
| Maximum working pressure | 20MPa |
| Protection level | IP65 |
| Fork body material | stainless steel 316, Hastelloy C22, manganese alloy 400 |
| Fork body coating | coating (perfect hydrophobicity and non-sticking of impurities in
the liquid) |
