Digital Flow Meter Water Flow Meter With Digital Display Water Flow
Meter
Description Digital Flow Meter Water Flow Meter With Digital Display Water
Flow Meter
Electromagnetic Flowmeters (EMF for short) is a new type of flow
measuring instrument developed rapidly with the development of
electronic technology in the 1950s and 1960s. Electromagnetic
flowmeter is an instrument that uses the principle of
electromagnetic induction to measure the flow of conductive fluid
according to the electromotive force induced by the conductive
fluid passing through an external magnetic field.
The structure of Digital Flow Meter Water Flow Meter With Digital Display Water
Flow Meter
The structure of electromagnetic flowmeter is mainly composed of
magnetic circuit system, measuring conduit, electrode, shell,
lining and converter.
Specification Digital Flow Meter Water Flow Meter With Digital Display Water
Flow Meter
| Nominal diameter | DN10-DN2000 |
| Nominal pressure | 0.6 ～ 70MPa |
| Accuracy | 0.5 or 1.0 |
| Installation mode | Flange mounting, flange holder is optional |
| Ambient temperature | -25℃～+60℃ |
| Medium temperature | Split type chloroprene rubber lining, polyurethane lining: -10℃～+8℃
PTFE,PFA, F46 lining:-10℃～+160℃, Integrated type: -10℃～+80℃ |
| Medium conductivity | ＞5μs/cm |
| Min flow rate measurement | 0.1m/s |
| Max flow rate measurement | 15m/s |
| Range ratio | 1:20,or custom |
| Output signal | Pulse /4-20mA (load resistor 0-750) |
| Power supply | 220VAC, tolerance 15% or +24 VDC, ripple ≤ 5% |
| Communication Interface | Optional RS485/RS232 |
| Protocol | MODBUS,HART,Profibus,etc |
| Measurement pipe (lining) material | Chloroprene rubber, polyurethane, PTFE, PFA, F46 and other decay
resistant materials |
| Measurement element (electrode) material | 316L stainless steel, titanium alloy, Hastelloy alloy, tantalum
alloy |
| Explosion-proof grade | Exd[ia]qIICT5/ ExmbⅡT4 |
Features Digital Flow Meter Water Flow Meter With Digital Display Water
Flow Meter
Intelligent electromagnetic flowmeter measurement is not affected
by fluid density, viscosity, temperature, pressure and
conductivity.
Intelligent electromagnetic flowmeter measurement pipe unimpeded
flow parts, no pressure loss, straight pipe requirements lower.
The intelligent electromagnetic flowmeter sensor can be provided
with a grounding electrode to realize the good grounding of the
instrument.
Intelligent electromagnetic flowmeter sensor using advanced
processing technology, so that the instrument has a good ability to
resist negative pressure.
The converter uses a backlit LCD display, which makes it easy to
read in the sun or in a dark room.
By setting the parameters of infrared remote control, in the harsh
environment do not open the cover of the converter can also be set
safely.
Intelligent electromagnetic flowmeter converter with self diagnosis
alarm output, air load detection alarm output, the upper and lower
limit alarm output, the output value of the flow and other
functions.
Intelligent electromagnetic flowmeter can be used not only for
general process detection, but also for the measurement of pulp,
pulp and paste.
