High Pressure Calibrator For Pressure Instruments Hand Pressure
Test Pump Portable Calibrator
Usage High Pressure Calibrator For Pressure Instruments Hand Pressure
Test Pump Portable Calibrator
The hand-operated pressure pump is a portable pressure pump. It is
used to verify the test instruments installed on site in the
industrial process and various pressure instruments used in the
control room. It can also provide a pressure source for the
calibration of the pressure measuring instrument manufacturers. All
kinds of pressure transmitters, pressure sensors and various
pressure instruments can be calibrated by hand-operated pressure
pumps.
Parameters High Pressure Calibrator For Pressure Instruments Hand Pressure
Test Pump Portable Calibrator
| output pressure range | Y039: 0-1.6MPa Y061: -0.1-0MPa Y060: -25MPa YFP-16: -0.088~1.6MPa(-0.88~16bar) YFP-20: -0.088~2.0MPa(-0.88~20bar) YFP-25: -0.088~2.5MPa(-0.88~25bar) |
| operating temperature | -20~50C |
| operating relative humidity | ~100% |
| flexible hose connector | M20*1.5 female |
| master gage connector | 1/4NPT male |
| dimensions | 235×120×65 230 x 110 x 60 |
| weight | 0.6kg 0.5kg |
| Accessories | 500 mm long plastic hose and a leatherette carrying bag |
| Outlet threads | 1/4 NPT, or to custom request |
| Vernier-adjuster | micro-adjustable, volume control |
Precautions for use High Pressure Calibrator For Pressure
Instruments Hand Pressure Test Pump Portable Calibrator
Before using the pressure pump, tighten the vent, fill it with
appropriate oil (such as 1/2 transformer oil), then tighten the
vent, hold it repeatedly, loosen the handle, and drive out the gas
in the cylinder before use. During the calibration process, pay
attention to keeping the various joints sealed. After the
calibration is completed, turn the oil drain handle to open the oil
release valve before disassembling the instrument, otherwise the
instrument will be easily damaged.
