Druck Low Differential Pressure Transducer Sensor Air
The wind pressure transmitter adopts aluminum alloy or stainless
steel casing, and applies isolation technology. The sensor is
converted into a standard current or voltage signal after precise
temperature compensation. It can measure the pressure or flow, and
realize the control of automatic measurement in the production
process.
Features Druck Low Differential Pressure Transducer Sensor Air
Measuring medium: gas (compatible with contact material, humidity
<90%, no condensation)
Overall material: shell ABS engineering plastic
Diaphragm silicon chip (contact)
Silicone for impulse pipe (contact)
Φ 6 pagoda mouth H59 copper (contact)
Cable locking head nylon (locking wire diameter 5-8mm)
LCD display without backlight
Parameter Druck Low Differential Pressure Transducer Sensor Air
Parameter Druck Low Differential Pressure Transducer Sensor Air
| Pressure mode: | differential pressure |
| Output signal: | 4-20mA, RS485 |
| Power supply voltage: | 12-36vdc |
| Accuracy class: | 0.5% FS (range ≥ 1kPa) 1% FS (range < 1kPa) |
| Working conditions: | medium temperature - 40-100 ℃ |
| Ambient temperature | - 40-85 ℃ |
| Temperature compensation: | - 10 ～ 60 ℃ |
| Seismic performance: | 10g (20... 2000Hz) |
| Response frequency: | ≤ 50Hz |
| Stable performance: | ± 0.3% FS / year (range ≥ 1kPa)
± 0.5% FS / year (range < 1kPa) |
| Temperature drift: | ± 0.03% FS / ℃ (within the temperature
compensation range) |
| Protection grade: | IP65 |
| Load characteristics: | current type load ≤ {(us-7.5) ÷ 0.02 (US =
supply voltage)} Ω |
