Best Selling Bench Top Desktop Economic Xenon Lamp Arc
Weathering Aging Tester Xenon Climatic Test Chamber Solar
Simulator
Environmental Test Chamber.pdf
Machine Summary:
Xenon lamp aging test is a kind of comprehensive climate test
equipment, support climate aging test, polymer light fastness
test(Polymer materials exposed to simulated solar spectrum of
artificial light through the glass to assess the light resistance
of materials). From the light, temperature, rain or condensation,
humidity and so on to do the simulation and strengthen test; use
simulating full sunlight spectrum xenon arc lamp to simulate the
destructive waves of different environment. Can be used for the
selection of new materials, improvement of existing materials or
evaluate the material durability After material composition changes
and other testing.
The Xenon lamp Simulate the uv light ,and the machine make the test
specimen expensed to uv light,high temperature and water spray to
proceed the test! This machine use xenon lamp tube to simulate the
sunlight radiation, use the condensate and spray to simulate the
dew and rain.
This machine only need a few days or weeks time, can show the
condition or the parts components of aging damage status outdoor
many months even a few years time, including colour fading, color
change, fracture, fissure, wrinkle, blister, embrittlement,
strength reduction, oxidation and so on.
Parameters:
| Model | ZL-6025C |
| Sample Exposure Area | 560 cm² |
| Performance Index | Blackboard or Black Mark Temperature | BST 35℃-100℃ |
| Spectral Wavelength | UV-A340, wave length:340nm |
| Irradiation Light Source | Full spectrum xenon lamp(air-cooled) irradiance:adjustable |
| Xenon lamp power | 2.5kw (lifetime:2000 hours) |
Temperature and Humidity Control System | Time Controller | Import programmable time computer integrated controller(MOELLER) |
| Accuracy Range | Setpoint accuracy: temperature±0.1℃ Indication accuracy: temperature±0.1℃ |
| Temperature Humidity Sensor | Platinum resistance Pt100Ω/mv |
| Heating System | The independent system,Nickel-chromium alloy electric heating
heater |
| Temperature Controller | Import integrated microcomputer temperature and humidity controller |
| Circulatory System | Low noise of heat-resistant air-condition type motor, leafy type
centrifugal rotor, Cooling tubes used air-cooled system |
| Water Spray | As option by buyer |
| Accessories | One pc Xenon lamp as spare parts; |
| Filter ,calibrator as option by buyer |
| Power Voltage | AC220V±10% 50±0.5HZ |
| Dimension | 81x35x75CM (L*D*H) |
| Weight | 60kg |
Maintenance of equipment:
Installation site should consider factors such as the cooling
efficiency of the machine and easy to check the maintenance, Other
installation considerations:
The distance between this machine with wall and any other machines
should be more than 60cm.
Should be set on the ground of the plain, no vibration, and use
gradienter examination.
Ambient temperature should be keep into 10℃～25℃, the machine can
operate in the most stable status. If ambient temperature change
too fast, for example change 5℃ or more in a few minutes, the
temperature and humidity control and cooling rate, will can’t very
stable control.
Should be away from the heat source and inflammable, explosive
substance.
Do not under direct sunlight, and maintain indoor airiness.
Avoid placed in the place of the dust too much.
Power supply line and the drain road, should be shortened as much
as possible.
