B-SST-200 Climatic Salt Spray Corrosion Test Chamber in Accordance
with GB10485-89
Description:
The salt spray test chamber is a climate simulation device that tests the corrosion of
electronic equipment, metallic material, as well as some surface
treatment--coating, galvanizing, organic/inorganic coating,
anodizing treatment, rust-proof oil coating, etc. Performance
indicators in line with requirements of GB / T5170.8 Electrical and
Electronic Products, Environmental Testing Equipment, the Basic
Parameters of the Test Method. The salt spray corrosion test
chamber according to GB / T2423.17 Electronic and Electrical
Products Basic Environmental Test Procedures Test: Salt Spray Test
Method for neutral salt spray test can also be used for acetic acid
salt test.
Corresponding standard :
1.GB/T 2423.17-1993 salt spray test
2.GB/T 2423.18-2000 salt spray test
3.GB/T 10125-1997 salt spray test
4.ASTM.B117-97 salt spray test
5.JIS H8502 salt spray test
6.IEC68-2-11 salt spray test
7.IEC68-2-52 1996 salt spray test
8.GB.10587-89 salt spray test
9.CNS.4158 salt spray test
10.CNS.4159 CASS Accelerated acetic acid copper salt spray test
11..GB/T 12967.3-91 CASS Accelerated acetic acid copper salt spray
test
Detailed configurations as follows:
1, according to CNS JIS ASTM GB2423.19 specifications, can be set
constant temperature to control
(A) Salt spray test: NSS, ACSS
1. testing room : 35 ℃ ± 1 ℃
2 saturated air barrels : 47 ℃ ± 1 ℃
(B) anti-corrosion test: CASS (copper acetate)
1.testing room: 50 ℃ ± 1 ℃
2 saturated air barrels: 63 ℃ ± 1 ℃
2, air supply system: air pressure 1Kg/cm2 Two-stage adjustments
(coarse / fine-tuning).
(A) the first paragraph for the rough adjustment 2-2.5Kg/cm2, the
second paragraph to fine-tune 1Kg/cm2.
(B) Testing configuration is switch connector designed for SO2.
3, spray form:
(A) Using Bo Nute principle to draw brine and then saline spray,
atomization uniform, non-blocking and crystallization, so that
ensure continuous spraying.
(B) Nozzle: The nozzle is made of special glass, adjust spray
volume and spray angle.
(C) spray volume: Adjustable 1 ~ 2ml (80cm2/hr) (average of 16-hour
volume).
Model | B-SST-60 | B-SST-90 | B-SST-120 | B-SST-160 | B-SST-200 |
| Internal Dim(W*H*D) | 60x45x40 | 90x60x50 | 120x100x50 | 160x100x50 | 200x100x50 |
| External Dim(W*H*D) | 108x63x119 | 140x80x139 | 178x120x149 | 230x130x149 | 270x130x159 |
| Cabinet Material | Corrosion-resistant polymer material |
| Laboratory temperature (℃) | A:25℃~70℃ B:0℃-70℃ C:-20℃-70℃ D:-40℃-70℃ |
| Saturated air barrel temperature(℃) | 35±1℃50±1℃
Saline test method:35±1℃/Corrosion test method:50±1℃ |
| Saturated air pressure (kg/c㎡) | 0.8-2.0±0.01 |
(ml／80c㎡.h)
Salt spray sedimentation rate (ml/80c㎡.h) | 1-2ml/80 cm2.h(Controllable) |
| PH value | Salt water test method:6.5～7.2／Test method for corrosion resistance:3.0-3.2
Saline test method:6.5-7.2/Corrosion test method:3.0-3.2 |
| Power Source | AC:220V 50Hz/AC:380V 60Hz |
Our Company:
Packing/Shipping:
