Water based Acrylic Epoxy Hybrid Emulsion
WL-120B Acrylic Epoxy Hybrid System Design for Metal Protection
Application, water-borne coatings, particularly in industrial
applications.
WL-120B is formulated to provide low in odor, fast dry,
non-flammable, and is safe and easy to use.
WL-120B as a metal surface protection paint resin, has the
efficient performance with the least cost and minimum waste, is
widely used in industrial and metal coatings for example structural
steel, tanks, pipes, barriers and equipments.,due to its quick
drying, environmental protection,Superior wetting .it not only has
good performance, but also has short working period, can realize
double guarantee of quality and efficiency.
WL-120B is stable to high shear speed and can be directly used for
pigment paste grinding.
It is recommended for metal protection projects which require short
and fast construction period.
Waterborne epoxy acrylic hybrid resin WL-120B
Main Component:
Waterborne epoxy modified resin and acrylic resin, neutralizing
agent, co-solvent and water
Specification:
Viscosity: 500-2500 mPa.s (Rotary viscometer)
Non-volatile material: 40.0 ± 2% (120℃/30min)
pH:8.0-10.5 (pH meter)
Appearance: white to light brown liquid
Application:
WL120B can be diluted by water, Drier has always been added in the
system .It can dry in condition of ambient temperature or low
temperature baking .
WL120B is high shear stable. It can be grinded in the coating
production.
WL120B have high gloss and excellent anticorrosion performance, can
be used for the mixed paint, antirust primer, etc., can dry by air
or bake by low temperature, Its coating have excellent gloss, and
antirust performance
WL120B is stable at neutral or slight alkaline conditions. It is
unstable that it is diluted with acidic or impurity water .PH value
has to be carefully observed in coating production , Precipitation
may occur if acidic pigments such as carbon black ,pH value of the
coating system can beadjusted triethylamine or
N,N-dimthylethanolamine .Viscosity of the dispersion will increase
as the pH value increases.
Clean-up:
Brush or roller are easily cleaned with soapy water
Storeagas:
Suggested storage temperature is 0-40℃.Best be uesd within half of
a year after it is produced.. It can be used if the product conform
to the standard after half of a year .
Note:
This specification may have been changed as the product improves.
The latest specification can be obtained from the manufacturer.
