Continuous Waste And Tyre Plastic Pyrolysis Recycling Plant For
Furnace Oil And Carbon Black
Continuous Waste Tyre Pyrolysis Plant
Pyrolysis Plant is used for recycling waste tire, waste plastic,
waste rubber to fuel oil. According to the actual situation in
every country and district, we developed different models of Batch
Pyrolysis Plants for waste tires, rubber and plastic with daily
capacity 25-40 tons.
The Project Report
Raw Material can be processed:
Waste tyre, Used rubber, Waste plastic (PP,PE,PS, HDPE), Oil
sludge,
Fuel as heating material :
Wood, Coal, Carbon briquette, Natural gas, Diesel, Fuel oil, Heavy
oil
End product output ( waste tyre as feeding material )
Fuel oil : 40%-45%
carbon black : 30%-35%
waste gas: 3%-5%
wire: 10%-15%
Area Covered:
Machine covered: 300square meters
All including ( office, storage and ect): 600 square meters
Operation workers per shift :
3-4 people
Technical Specification
| NO. | ITEM | Technical Parameter |
| 1 | Suitable Raw Materials | Small pieces of Waste tyre,rubber,waste plastic<=10cm |
| 2 | Operating Mode | Fully Continuous Opreation |
| 3 | Structure | Horizontal Type |
| 4 | Loading and discharging | Fully automatic feeding and discharging under high temperature at
same time |
| 5 | Capacity(24h) | 20ton, 30ton, 50ton, 80ton, 100ton |
| 6 | Work Pressure | Slightly Negative Pressure |
| 7 | Oil Yield of tyres | 40%-45% |
| 8 | Reactor Rotation Speed | 1R/M |
| 9 | Power | 50-60kw/h |
| 10 | Cooling Method | Cycle water |
| 11 | Type of Drive | Sprocket Wheel |
| 12 | Heating Method | Coal, tyre oil, gas |
| 13 | NoisedB(A) | <=85 |
| 14 | Main Reactor Weight(Mt) | 15-18Mt |
| 15 | Total Weight(Mt) | 30—40Mt |
| 16 | Installation Space Required | 60m*30m |
| 17 | Manpower | 2persons/shift |
| 18 | Shipment | 1*40FR+3~4 HC |
| 19 | Delivery time | <=70Days |
Performance Feature
1. Safety. We treat safety as the first important thing in
production.
1) Two devices to avoid backfire in production: oil-water separator
and anti-back fire device.
2) Vacuum device makes reactor working under ordinary pressure or
negative pressure.
3) Temperature monitoring device to avoid excessive working
temperature.
4) Pressure gage to monitor the pressure. If it goes above a
certain level, the bell will alarm and the safety valve will
release the pressure automatically.
5) Carbon black is discharged in a closed situation to avoid
catching fire.
2. Environmental protection 10 ton used tire pyrolysis plant
1) The flue gas (caused by burning fuel to heat the reactor) will
be purified and cooled by dust removal device, then can be released
into air through chimney.
2) The procedure to remove carbon black is working under closed
situation to avoid pollution.
3. Energy saving waste tire recycling pyrolysis plant
1) The flame path is designed as spiral so that the quantity of
heat can be fully used.
2) The residual gas from pyrolysis is recycled to furnace burning
to heating the reactor.
3) The insulation cover is formed by 3 levels: steel plate, rock
wool and refractory cement. Excellent thermal insulation effect
helps saving fuel.
4. Long service life
1) The material of reactor is Q345R boiler plate with 16/18mm
thickness which is produced by Chinese well-known enterprise. The
head of reactor and accessories are using one-piece molding shell
cover rather than welded plate.
2) All cutting, rolling and welding works are finished by automatic
machines.
3) We know quite well about the material quality and manufacturing
process, that’s why we are confident in the service life of our
products.
4) We also supply installation service, training service and one
year warranty.
Applications
It is applied to extract fuel oil from waste tires, rubbers,
plastics, soles, life garbage, cable skin and so on .
seperating crude carbon black, steel wires. the sync gas produced
can also be recycled to use as fuel to heat reactor, considerable
cost of tire plastic plant.
