Auto Flute Laminating Machine With Leading Edge Paper Feeding Type
Flying
Performance characteristics:
Computerized high-speed bonding, up to 10000 sheets per hour (paper
length 700mm).
Leading edge paper feeding type flying: Patented leading edge paper
feeding type Feida (PAT No.100 41 520.2, Germany; PAT No.120787 in
Taiwan Province and PAT No.125494 in China) run at high speed and
smoothly, and paper size conversion needs no adjustment.
Feida seat: E-type low table sheet piling design, which can push
the paper to be pasted into place by a pallet truck (PAT No.152346,
Taiwan Province). A track yuba pre-stack paper pushing table can be
optionally installed.
Glue coating device: the high-precision coating wheel is matched
with the paper stripper to prevent paper from getting involved, and
the glue blocking mechanism at the edge of the gluing wheel
automatically controls the page, and the glue backflow can be
adjusted without overflowing at high speed.
Sensing compensation pair device: multiple groups of electric eyes
are used to sense the advancing relative position of the base
paper, so that the servo motors on both sides of the paper make
independent transmission, and the upper and lower papers are
aligned vertically, which is accurate, high-speed and smooth (PAT
No.100 42261.6 in Germany; Taiwan Province PAT No.150420; China PAT
No.111631).
Full-function electric control system: it can automatically detect
operation status, abnormal display and work record by using
man-machine interface and PLC program light signal display, and the
electrical planning meets CE standard.
main technical parameters
model | AO-1412 |
max size of cover face (W×L) | 1400×1200mm |
mix size of cover face (W×L) | 450×420mm |
thikness of printer paper | 150－800g |
thickness of bottom paper | white cardboard with a weight greater than 350g
E/A/B 3 ply/5 ply cardboard |
design speed | Max.160M/min |
gross power | 25hp |
length | 11000mm |
width | 2100mm |
weight | 6500kg |
