CanOpen EthereCAT Three Phase Servo Drive 220V/380V For Automation
Motion Control
Products Description
| Product Name | Three Phase Servo Drive |
| Brand | Vector |
| Model No. | VEC-VC-00323HC-M-E |
| Power | 30KW |
| Input/Output | Pulse/Analog |
| Voltage | 220V/380V |
| Phase | Three Phase |
| Rated Current | 60A |
| Communication Protocols | CanOpen / EtherCAT |
| Encoder | 24bit absolute encoder; |
Installation Precautions
● Install the driver on a dry and sturdy platform. Maintain good
ventilation and
heat dissipation during installation and maintain good grounding.
● Please install in the specified direction to avoid malfunction.
● When installing, do not block the suction and exhaust ports, and
do not allow foreign objects inside the
product to enter, otherwise it may cause malfunction or fire due to
aging of internal components.
● Do not place heavy objects on or under this product as this may
result in injury.
● Please install in the following environment:
1.places without direct sunlight;
2.Locations where the ambient temperature is in the range of 0 ° C
to 55 ° C;
3.Relative humidity in the range of 0% to 95%, and no condensation;
4.Locations free of water droplets, vapors, dust and oily dust;
5.Locations where there is no high heat device;
6.Non-corrosive, flammable gas and liquid sites;
7.It is not easy to splash water, oil and medicine;
8.places that are not exposed to radioactive radiation;
9.Strong and vibration-free places;
10.Locations where there is no electromagnetic noise interference.
Installation
Environment
Requirements | Atmospheric Pressure | 86~106kPa |
| Mbient Humidity | 0~55℃ |
| Ambient Temperature | 0~90%RH |
| IP Rating | IP20 |
| Vibration | 0~4.9m/s^2 |
Maintenance and inspection Precautions
● do not change the wiring while the power is on, otherwise it may
cause electric shock or injury.
● please perform wiring or inspection by professional technicians,
otherwise it
may cause electric shock or product failure.
● please check the power after the power is off for at least 5
minutes. Even if the power is turned off,
high voltage may remain inside the servo drive. Therefore, do not
touch the power terminal within 5 minutes
after the power is turned off, otherwise it may cause electric
shock.
●when replacing the servo drive, please back up the servo driver
user parameters to be replaced before the
replacement, and transfer the backup to the new servo drive, and
then restart the operation, otherwise the
machine may be damaged.
| Key Name | Key function |
| PAR/ALM | mode switch, return to the previous menu |
| ▲(add) | increase flashing bit value of the LED digital tube |
| ▼(dec) | Decrease flashing digit value of the LED digital tube |
| STOP/RST | Moves the blinking LED tube to the left; checks the high value of
data
longer than 5 bits; Fault reset;execute Fn function |
| RD/WT | read/write parameter values;enter fn page |
Other Questions:
Q1. How to select the suitable model?
A: Please confirm your requirements for Rated Power, Current,
Voltage,
Torque and select the suitable model based our model list;
Q2. How to set the programming system?
A: Our Servo drive support the Global Communication protocols:
Modbus/CANopen/EtherCAT,
Please Just make the programming follow your experiences;
Certificates
1. CE (EU Safety Standard);
2. IEC/EN61800-5-1:2007 (Safety requirements for electrical,
thermal and energy in Section 5-1 of the
variable speed electric driver system), corresponding to the
national standard GB12668.501-2013;
3, IEC / EN61800-3: 2004 + A1 (speed control electric driver system
part 3 electromagnetic compatibility
standards and its specific test methods), corresponding to the
national standard GB12668.3-2012.
Quality Checking:
Four times Production testing
Two Times 24 hoursTesting
100% Inspection Before Shipping
Delivery Time and Shipping Way
1. For small order we always can delivery out within 1 week.
2. Our products can be shippied via Air, Land or Sea.
| Packing details of Servo Drive |
| Products | E1(3-6A) | E2(7-12A) | E3(16-27A) |
| Ctn. Size | 280*208*78 | 280*208*112 | 375*290*155 |
Our Team:
