CanOpen Communication High Torque Analog Servo Drive For CNC
Equipment
Item Name: CNC Servo Drive
Power: 55KW
Phase: Three Phase 380V
Communication Type: CanOpen
Control Mode: Position, Speed and Torque Control Mode
Encoder: 17/23 bit Tamagawa absolute encoder
Products Description
| Product Name | CNC Servo Drive |
| Brand | Vector |
| Model No. | VEC-VC-11033H-M-EA |
| Power4 | 55KW |
| Voltage | 380V |
| Phase | Three Phase |
| Rated Current | 110A |
| Communication Protocols | CANopen |
| Encoder | 17/23 bit Tamagawa absolute encoder |
How is the Servo Drive works? The Location control model, Speed
control model and Trogue control model.
| Voltage | Control Mode | Three-phase full-controlled rectification
SVPWM modulation |
| Encoder | Encoder Feedback | 17bit Tamagawa absolute encoder;
23bit Tamagawa absolute encoder; |
| Pulse Command Input | Pulse Type | Differential input,Open collector |
| Frequency Range | Differential input:0-500kHz,pulse width greater than 1us
Open collector: 0-300kHz,pulse width greater than 2.5us |
| Pulse Mode | pulse + direction; AB pluses; CW+CCW; |
| Analog Input | Voltage Range | -10V to 10V |
| Input Impedance | 10kΩ |
| Maximum Frequency | 1.5kHz |
| DI/DO Interface Type | NPN/PNP |
| Communication | Modbus/CANopen/EtherCAT |
Servo Drive Description- Detaails about a Servo Drive, how to
select the Servo drive model and do installation?
Certificates
1. CE (EU Safety Standard);
2. IEC/EN61800-5-1:2007 (Safety requirements for electrical,
thermal and energy in Section 5-1 of
the variable speed electric driver system), corresponding to the
national standard GB12668.501-2013;
3, IEC / EN61800-3: 2004 + A1 (speed control electric driver system
part 3 electromagnetic compatibility
standards and its specific test methods), corresponding to the
national standard GB12668.3-2012.
Delivery Time and Shipping Way
1. For small order we always can delivery out within 1 week.
2. Our products can be shippied via Air, Land or Sea.
| Quantity | 1-5 kits | 50-100 kits | 200-500 kits |
| Delivery time | Within 3 days | 5-10 days | 15-25 days |
| Packing details of Servo Drive |
| Products | E1(3-6A) | E2(7-12A) | E3(16-27A) | C015(32-38A) | C022(45-60A) |
| Ctn. Size | 280*208*78 | 280*208*112 | 375*290*155 | 440*296*288 | 510*305*325 |
Accessories:
| Accessory name | Image | |
| Satandard Spare Parts | Power terminal |  | Adapt to E1,E2 structure drive |
| Cn3 encoder plug | Encoder plug on the driver side |
| Cn4 control terminal plug | Input/output signal terminals,user wiring |
| Encoder connection line | The standard cable length is 3, 5, 8, 10, 13, 15 meters, according
to customer
needs Provide independent connector |
| Power line | The standard cable length is 3, 5, 8, 10, 13, 15 meters, according
to customer
needs Provide independent connector |
| Drive monitoring line | Connect and adjust the software for remote monitoring and firmware
update |
| Purchasing Spare Parts | USB to RS232 Adapter cable | If necessary, self purchase |
| Ethernet communication line | If necessary, self purchase |
Contact Us
