Advantages:
1 Easy-handing and safety
2 Advantage design
3 Almost full automatic control
4 equality heat and good heat distribution
5 Durable and reliable
Benefits of tyre retreading
The benefits of retreading are that it is both environmentally
friendly and cost-efficient! When the tread has worn off, only
about 20% of the tyre is used up. The carcass, which represents
about 80% of the tyre's value, can be re-rubberized for a "new tyre
life".
To produce a truck or bus tyre requires about 60-80 kg of rubber
mixture. Retreading the tyre takes only about 15 kg of rubber. A
considerable amount of raw materials can therefore be saved. In the
EU, this equates to more than 300,000 tones per year!
To produce a car tyre requires about 28 litres of crude oil. To
retread a car tyre, on the other hand, only 5.5 litres of oil are
needed
working process of the tyre retreading flow chart:
1.check out
Make sure the used tire casing can be accepted for retreading, or
rejection.
2) Buffing
Buffing tire casing, buffing the worn tread rubber..
3) Planing
Remove all embedded objects in the casing, make sure the tire
surface clean and solid, suitable for retreading.
4) Use glue gun
Use glue gun to spray a thin layer of concentrated liquid cement in
the repair tire casings.
5) Glue filling
Fill in the repair cementing in the tire wound.
6) Apply the tread rubber
Apply the cushion gum between the tread rubber and the casing, as
the bonding layer. As a new layer , the intensive precure tread
rubber is forming in the tire casings
7) Assemble envelop
A special envelop is used to package the tires, ensure the tire
casing and precure tread rubber successfully bond together
8) Curing
This is a process of applying the new tread rubber to the prepared
tire casings, then put into curing chamber, in a certain pressure
and temperature after a period of correct time curing, the cushion
rubber layer will adhere tight to the tire casings.
9) Final inspection
Make sure all the recap been checked carefully, to ensure the
safety and unharmed appearance of recycling products which sell to
customers.
10) Everything looks "like new"
Now, end product! Safe and durable, is equally matched with the new
tire. And ready to hit the road!
4. Optional production line
4pcs production line, 6pcs production line
8pcs production line, 10pcs production line
12pcs production line, 16pcs production line
20pcs production line, 24pcs production line, etc
Product parameter
| Model | 8tire multi-functional precure chamber |
| Vulcanizing pot pressure | 0.5-0.6Mpa |
| Automatic complete pressure | 0.7-0.8Mpa |
| Packing set of pressure | 0.4Mpa |
| Temperature | 95-120°C |
| Power | 31kw |
| Curing time | 2.6~3h |
| Dimensions(L*W*H_) | 4100*2300*2100mm |
