slitter machine rolling shear knife for tinplate coating line
Senda rolling shear blades for tinplate coating line used with
flying shear blade for cutting hot rolling coid. cold milling coil
etc. with fixing 4pcs of knives which are equipped by 2pcs on each
side respectively and they are used for cutting the ends of both:
able to cut 0.2~3.2mm sheet for cold milling and cut 1.0~12.7mm
sheet for hot mills.
Brand: Senda
Country of Origin: China
Material: SKD11,D2, M2,LD, K110
Size: MAX OD1500mm
Thickness tolerance: +- 0.001mm
Inner Diameter: + 0.02mm
Flatness: ≤ 0.002mm
Parallelism: ≤ 0.002mm
Concentricity: ≤ 0.02mm
Surface roundness : Ra 0.1um
Hardness: Tool steel: HRC57~~59
Packaging: plywood case with anti-rust film inside
Application: electrolytic tinplate coating line
Knives are available with polished side faces ,High cost
performance ,Punctual delivery .
Packaging Details:
1, PE film or Kraft paper in anti-rust oil - keep air/water/humid
away, thus rust-proofing
2, Bubble Wrap - increases the impact resistance ability
3, Rubber Slip or Corrugated Angle - gives special care to knife
edges
4, Wood Screws crates - makes opening easier without damaging the
crates
5, Corrugated boxes or plywood case - provide superior protection
and stack-ability
Senda starting from 1998, focus on the quality of products and
provide better service. Now we have over 100 workers, CNC lathes,
High precision internal and external circular grinding machines,
heat-treatment furnaces grinding machines and inspection machines.
