Servo PLC All In One Controller 0.4KW/ 0.75KW Single-Phase AC220V
Servo
Advantages:
● Integrated motion control, servo drive and PLC functions;
● With RS485 interface, it supports Modbus protocol, etc;
● Control loop power supply: provided by internal conversion,
without external power supply;
● 17 bit single turn encoder signal output;
● I/O port, 16 photoelectric isolation inputs /16 photoelectric
isolation outputs
Intelligent servo is a part of servo system, which is mainly used
in high-speed chip mounter, precision dispensing machine, solid
crystal machine, laser cutting machine, robot, CNC machine tool,
medical equipment, semiconductor and assembly equipment, printing,
packaging, textile, aviation, aerospace and other requirements of
high-speed, high-precision, high dynamic response, low noise,
medium and large-scale automation equipment.
Technical parameters:
| Servo drive series | Mx3g-c40 /C75 series servo PLC all-in-one |
| size | 160 * 135 * 42 |
| input power | Main circuit power supply: single-phase AC220V, voltage range
200V~240V, 50/60Hz Control loop power supply: internal conversion, no external power
supply |
| PLC logic power supply voltage | DC24V |
| Drive motor | Linear (DDL), torque (DDR), voice coil, brushless, brushless servo
motor |
| Control mode | Motion sequence, point to point, electronic gear, position, speed,
torque control mode |
| Encoder feedback | 17 bit single loop absolute value encoder |
| operation mode | Independent programmable control (PLC), external control (step
pulse, PWM, encoder A/B), or distributed network control (Modbus/RS
communication) |
| Communication type | RS485 (supports ModBUS and RS protocols) |
| Input,output signal | 16 photoelectric isolated inputs 16 photoelectric isolated outputs, of which three high-speed pulses
are programmable and general-purpose |
| Rated power (KW) | |
| Rated current (A) | 2.5A/3.0A |
| Rated current range of adaptive motor (A) | 2.0~3.0A/3.0~4.0A |
| Program capacity | 16K/step |
| High speed processing | I/O refresh command, input interrupt 6 points, timer interrupt 3
points |
| Data register | D0~D3999, 4000 points in total |
Operating ambient temperature | -10~55 ℃ non freezing |
| Operating ambient humidity | 10 ~99[RH%] non condensing |
| Storage temperature | -20℃~60℃(Maximum temperature guarantee: 80 ℃ for 72 hours) |
| Storage humidity | 10 ~99[RH%] non condensing |
| Height | Normal use below 1000m altitude, derated use above 1000m altitude |
| Vibration / shock | 4.9 (m/s2) /19.6 (m/s2 ) |
| Occasion | Indoor, no dust, no corrosive gas, no direct sunlight |
Comprehensive protection design | Overcurrent, short circuit, grounding, overvoltage, undervoltage,
I2t, control error |
Wiring diagram of servo all-in-one:
