8 Axis Servo Control PLC Logic Controller GX WORKS2 Password
Protection
PLC Logic Controller Ethernet 8 Axis Servo Control Compatible With
GX WORKS 2 Password Protection
CoolmayL02 series PLC is a high-function general-purpose controller
specially designed for automation equipment.L02 series modules can
be expanded up to 31 units. The appearance is simple and neat, the
dark gray case is anti-fouling and anti-dirty, suitable for
harshindustrial environments, and has the characteristics of
recyclability, low pollution, and lead-free. lt complies with
international environmental protection regulations and the concept
of resource reuse.
The host has a built-in communication network and communicates with
the Ethernet / IP industrial network to realize high-speed data
transmission. Dial switch to set up lP, quickly build a network
environment, built-in multiple sets of industry-specific functional
modules, convenient for customer applications, and can set multiple
password protection to improve system security.
| Programming language | Ladder diagram(LD) / lnstruction list / Sequential function
chart(SFC) |
| Program capacity | 32k steps |
| Expansion model | Max limit of 31 units: max 12 analog input/output respectively |
| Max l/O | FX3U mode: 512 points; FX3G mode: 256 points (the sum of input and
output points) |
| CPU Digital I/O | 16DI / 16DO |
| CPU Analog I/O | / |
| High-speed pulse | 4-axis 200KHz+4-axis 100KHz |
| High-speed counter | 6 channels 60KHz |
| Do type | LO2M32T/LO2M24T: Transistor output, load maximum 500mA, low level
NPN, COM connected to negative |
| LO2M32R/LO2M24R: Relay output, load maximum 2A, dry contact, COM
can be connected to positive ornegative |
| Default COM | Type-C, RS-232, RS-485*2, Ethernet, CAN |
| Protocol | Mitsubishi programming port Modbus RTU, Modbus TCP, Modbus UDP,
freeport protocol, CAN, Ethernet/IP, Mitsubishi BD board |
Data backup function No
battery storage | Program | Flash ROM |
| Retentive area | MRAM has no write limit |
| Calendar(RTC) | Commercially available batteries CR1620(optional) |
| Self-diagnosis | CPU abnormalities, internal memory problems, etc |
| Rated input voltage | 24VDC(土10%) |
| Software | Compatible with WORKS 2 |
| Detailed info. refer to Coolmay L02 Series PLC Progarmming Manual
L02 Series PLC Controller User Manual |
Features:
L02 series CPU supports up to 8 axis servo control,6 groups of
high-speed counter inputs
Support digital, analog and temperature module expansion (max 31
units)
Provide high-speed computing speed: the fastest execution speed of
basic instructionscan reach 0.35us
Provide multiple motion control commands such as position, speed,
positioning and interpolation
Built-in maximum 16DI/16DO,RS-232/RS-485*2,Ethernet and CAN
interfaces
L02 host motion controller has built-in multiple l/O
andcommunication interfaces, which can meet the market demandfor
compactness, high performance and high value
Ethernet/IP solution:
The communication bus protocol adopts the standard Ethernet/IP
communi-cation bus, which can easily realize barrier-free
connection with Ethernet/IPPLC or industrial computer. The
communication interface mode is 2 RJ45 FastEthernet interfaces, and
the internal port switching function has been implemented, so
multiple slave stations can be easily cascaded withoutadding a
switch.
