Double Roller Extrusion DAP NPK Compound Fertilizer Granulation
Machine
Introduction of fertilizer granulator machine
This series of roll extrusion granulator belongs to sliding, its
working principle is: belt and pulleys driven by a motor, is
transmitted to the drive shaft through the speed reducer, and run
in the same direction and open gear pulleys. Add material from the
hopper, through the extruding roller, threshing and granulated, and
then sieved into the crushing chamber by a pair of chains, where
the separation of the finished product and sieved particles
(balls), and then return the material And mixed with new materials
for granulation. With the continuous rotation of the motor and
material constantly, you can achieve mass production.
Features of fertilizer granulator machine
1, Feed in the installation stirring device to ensure uniform
uniform feeding.
2. Host equipped with automatic cleaning device, to prevent the
material sticking roller plate.
the gear on the regular and not displaced.
5. All parts connecting material made of stainless steel, corrosion
resistant.3. The roll gap adjusting variable gear stepping adjusted
to ensure that the gap symmetry, easy to operate.
4. Adjust the rollsheet inside the spline gears are adjusted to
ensure that.
Advantages of fertilizer granunlator machine
1. No drying technology, normal temperature granulating, once
forming.
2. Low investment, quick profit, good economic returns, etc.1. No
drying, granulation at room temperature, a molding.
2. Less investment and quick profits, good economic returns and so
on.
3, a combination of granulation, molding, integrally sieving,
granulation beautiful appearance, easy operation, and low power
consumption.
4. The main bearing frame made of high quality corrosion resistant
casting material, to make it more stable, and extend the life of
the roller.
Working principle of fertilizer grannulator machine
Sliding design extrusion, through a two-roll feed, then into the
dispersion chamber, made of particles, a screen installed at the
bottom of the machine, can be customized according to customer
requirements, and finally, sieved granules qualified, and the
remaining material back mixer Re-granulate.
Parameter of fertilizer granulator machine
| Model | DZJ-I-1.0 | DZJ-I-2.0 | DZJ-I-3.0 | DZJ-I-4.0 | DZJ-II-1.0 | DZJ-II-2.0 | DZJ-II-3.0 |
| Capacity | 1-1.5 | 1.5-2.5 | 2.5-3.5 | 3.5-4.5 | 1-2 | 1.5-2.5 | 2.5-3.5 |
| Power | 15kw | 18.5kw | 22kw | 45kw | 15kw | 18.5kw | 22kw |
| Roller size | 150*220 | 150*300 | 186*300 | 300*300 | 150*220 | 150*300 | 186*300 |
| Feeding size | <=0.5 | <=0.5 | <=0.5 | <=0.5 | <=0.5 | <=0.5 | <=0.5 |
| Finished product | 2.5-10 | 2.5-10 | 2.5-20 | 2.5-30 | 2.5-10 | 2.5-20 | 2.5-30 |
| Moisture | 2%-5% | 2%-5% | 2%-5% | 2%-5% | 2%-5% | 2%-5% | 2%-5% |
Picture of fertilizer granualator machine
