working process of the tyre retreading flow chart:
1.check out
Make sure the used tire casing can be accepted for retreading, or
rejection.
2) Buffing
Buffing tire casing, buffing the worn tread rubber..
3) Planing
Remove all embedded objects in the casing, make sure the tire
surface clean and solid, suitable for retreading.
4) Use glue gun
Use glue gun to spray a thin layer of concentrated liquid cement in
the repair tire casings.
5) Glue filling
Fill in the repair cementing in the tire wound.
6) Apply the tread rubber
Apply the cushion gum between the tread rubber and the casing, as
the bonding layer. As a new layer , the intensive precure tread
rubber is forming in the tire casings
7) Assemble envelop
A special envelop is used to package the tires, ensure the tire
casing and precure tread rubber successfully bond together
8) Curing
This is a process of applying the new tread rubber to the prepared
tire casings, then put into curing chamber, in a certain pressure
and temperature after a period of correct time curing, the cushion
rubber layer will adhere tight to the tire casings.
9) Final inspection
Make sure all the recap been checked carefully, to ensure the
safety and unharmed appearance of recycling products which sell to
customers.
10) Everything looks "like new"
Now, end product! Safe and durable, is equally matched with the new
tire. And ready to hit the road!
