| Maximum glass width | 2500mm (effective maximum: 2650mm) |
| Minimum glass specification | 400mm×400mm (limited to single row on left and right sides) |
| Glass thickness | 3mm-25mm (digital display) |
| Speed range | glass thickness within 3-25mm Vmax=1-12m/min |
| Main drive, brush speed regulation method | frequency control |
| Table height | 900±25mm |
| Total power | 42KW(water-bearing wind heating: 15KW) |
| Water source | self-circulation, tap water (according to civil water standards)
and deionized water water supplement (deionized water equipment
shall be provided by the buyer) |
| Power source | 380V 50Hz |
| Dimensions (length × width × height) | approximately 6260*4800*3100 |
| Weight | 3940kg |
Origin of motor and main accessories:
| Main drive motor | Zhejiang province |
| Brush motor | Zhejiang province |
| High pressure air blower | Guangdong province |
| The water pump | Shanqing |
| brush | Anhui province |
| Rubber roller | Guangdong province |
| Frequency converter | VEICHI/Rexroth |
| Electric parts | Schneider |
1.Aluminum alloy assembled structure, no scrap concept, permanent
use,high efficiency,
energy saving 70% efficiency；
2. The rest of the sheet metal parts are sprayed with advanced
mechanical paint or powder；
3. The shaft of rubber roller is made of stainless steel ；
4. The washing part in contact with water is made of stainless steel；
5. Cleaning department, wind staff overall lift, the maximum lift:
350mm,easy to clean and
maintain；
6. Three pairs of brush(Ø150mm)Stainless steel shaft configuration
(low-e glass, ordinary
coated glass and sunshine coated glass can be washed without
damaging the coated surface)；
7. Two pairs of special stainless steel aluminum alloy air knife
configuration, strong wind,
good air drying effect, with heating system(with temperature
control device, optional
opening and closing)；
8. The fan is equipped with air filter in the air inlet chamber, with
large air volume and good
air drying effect,The whole fan box is installed in the upper part
of glass washing machine,
with the air filter screen on the side for easy inspection and
cleaning；
9. Main drive for gear transmission, frequency control, digital
display , the rotation of the
brush roller in the washing section is driven by independent belts
of the upper and lower
motors respectively, the frequency conversion adjustment speed is
stable, the service life
is long, realizes the cleaning high request special glass；
10. Mechanical button control, cleaning machine digital display, easy
to operate, easy to
operate, easy to maintain；
11. Washing machine water tank outside, convenient water tank
cleaning, water change,
check, so that the washing machine cleaning effect is cleaner.
12. Optional with PLC control, touch screen display.It is convenient
for workers to operate
and maintain, and can be connected to all manufacturers of edge
grinding machines
without gap.(purchase separately if necessary).
