Check Valve

Swing Check Valve,Check Valve,Non-Return Valves,Reflux Valve,

A check valve is a device that only allows the flow of fluids in one direction. They have two ports, one as an inlet for the media and one as the output for the media. Since they only allow media flow in one direction, they are commonly referred to as ‘one way valves’ or ‘non return valves.’ The main purpose of a check valve is to prevent backflow in the system.
A check valve relies on a pressure differential to work. They require a higher pressure on the input side of the valve than the output side to open the valve. When the pressure is higher on the outlet side (or the input side pressure is not high enough), the valve will close. Depending on the valve type, the closure mechanism is different. Unlike other valves, they do not need a handle, lever, actuator, or human to correctly work.

They are commonly installed in applications that backflow would cause an issue. However, since they are non return valves, they are a cheap, effective, and easy solution to solve a potential issue. Backflow can cause an issue if the backflow is contaminated, and therefore, contaminates the media upstream. For example, a sewer line will have a non return valve to ensure that waste can leave but not re-enter the system. They are also used if backflow will cause damage to equipment upstream that can only allow media to flow in one direction. For example, a reverse osmosis filter can only have water pass through it in one direction, so a one way valve is installed downstream to prevent this. There are various sizes, designs, and material to ensure there is a check valve for every application.

Wuhan Libin Valve Manufacturing Co., Ltd. is a high-end water industry valve manufacturing enterprise, which is a strategic partner of Wuhan Valve Co., Ltd. Libin has 30 years of valve production history, and it is a high-quality manufacturer of the United States, Europe, and other international first-class valve enterprises.
In China, Libin has a first-class valve manufacturing base and types of equipment for testing. Libin has a great technical reserve which can provide a high-level of technical consultation for users and designing institute, meanwhile, has in-depth research on the problems of water hammer, cavitation and vibration in some hydraulic systems, and super-large scale pressure reduction, etc. Libin have a lot of classic cases.
Libin is very strict in QC. It have been producing and selling valves for ten years, no fault, no repair.
Libin has strong design and production capacity, both conventional products and customized products, the periods of design, production, and delivery are very short. Libin has own special cost control experience, and the price of valves is extremely competitive.
Libin is willing to work closely with valve users, manufacturers and dealers all over the world. Our aim is to develop the best products and provide the best service.

Our Advantages:

We can customize special products for a range of customers;
We can provide high-level technical services in the stage of engineering design to guide users to select suitable valves;
We deliver the goods quickly;
The price of our products is low;
The failure rate of our products is zero.