Single Channel Turnstile Barrier Gate Access Control System Anti
Oxidation
Door Access Control Equipment Security Single Channel RFID Full
Height Turnstile
Introduction:
Size (mm mm): L1450mm*W1450mm*H2200mm
Main Material Case: SUS304/SUS316 1.5mm stainless steel
Movement: 45# steel, surface plating color zinc
Door : stainless steel turntable
Movement Performance:
Cabinet: stainless steel turntable
Drive mode: servo mobile positioning drive
Power drive: semi-automatic
Open the door:single rotation
Switching door speed: 0.4~0.8 seconds (user can set)
Channel width: 600mm;
Equipment noise:less than 30db
Passing speed: normally closed mode 35 people / minute; normally
open mode 60 people / minute
Movement life: 5 million times
Features
The whole system runs with stepless secondary positioning device.
The running process is controlled by sensors without mechanical
collision.
CNC machining process, fine surface treatment, strong corrosion
resistance
With automatic reset function, if the pedestrian reads the valid
card, if the user does not pass within the specified time, the
system will automatically cancel the user's permission for the
pass.
Easy to use, convenient for the passage of luggage
Anti-tailing function: protection level 2
Access mode: one-way, two-way (optional), adjustable running speed;
multiple working modes are optional
Lighting Tip: Passing Direction
With lightning protection and leakage protection
Prevent illegal operation and alarm function
Standard external electrical interface with safety isolation, can
be connected with various control devices for system integration
Remote control and setting function
Electrical and Environmental
Voltage: 220V
Frequency: single phase 50Hz to 60Hz
Working voltage: DC24V
Current: static 300mA; dynamic 4A (maximum operating current)
Operating temperature: -20 to 70 ° C (-4 to 158 ° F)
Storage temperature: -40 to 80 ° C (-40 to 176 ° F)
Relative humidity: 5% to 95% in non-solidified state
Basic parameters:
| Dimensions | 1450*1500*2310mm |
| Cabinet material | 38 round tube, 1.5mm 304 Stainless Steel |
| Channel width | 550-650mm |
| Ambient temperature | -20 degrees to 60 degrees |
| Working environment | indoor and outdoor (outdoor canopy) |
Technical Parameters:
| Input voltage | 100V~240V |
| Driving voltage | 24V |
| Equipment power | 30W |
| Response time | 0.2S |
| Passing speed | 35 people / min |
| Communication interface | RS485 |
| Communication distance | Less than 1200m |
| Open brake signal input | Dry contact |
| Switching door time | Less than 1S |
Functions:
This is a highly reliable full height revolving door. The clever
design of the whole machine makes the installation and maintenance
of this product very convenient. A standard electromechanical
device is configured to prevent double pass at the same time. In
addition, the hydraulic shock absorber ensures smooth and quiet
operation.
The whole product frame adopts stainless steel laser cutting, CNC
bending forming, beautiful appearance, and the system adopts
standard quick plugging and unplugging electronic interface, which
can integrate various reading and writing devices, etc., which can
conveniently read ID card, IC card, etc. The writing device is
integrated on the device to provide an orderly and civilized way
for the entry and exit personnel, and can prevent illegal personnel
from entering and exiting. At the same time, in order to meet the
requirements of the fire exit channel, in case of emergency or
power failure, the fault protection mode can be set. That is, the
rotating shaft is free to rotate and is switched to the free
two-way traffic mode.
FAQ:
Q1. What is your terms of packing?
A: First, we will pack our goods by protective film. Then we will
put it in a neutral cartons. Third,we will pack it in standard
export wooden case to protect the goods perfectly.
Q2. What is your terms of payment?
A: T/T 30% as deposit, and 70% before delivery. We'll show you the
photos or video of the products and packages before you pay the
balance.
Q3. What is your terms of delivery?
A: EXW, FOB, CFR, CIF, DDU.
Q4. How about your delivery time?
A: Generally, it will take 10 to 20 days after receiving your
advance payment. The specific delivery time depends on the items
and the quantity of your order.
Q5. Can you produce according to the samples?
A: Yes, we can produce by your samples or technical drawings. We
can build the molds and fixtures.
Q6. What is your sample policy?
A: We can supply the sample if we have ready parts in stock, but
the customers have to pay the sample cost and the courier cost.
Q7. Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery.
Q8: How do you make our business long-term and good relationship?
A:1. We keep good quality and competitive price to ensure our
customers benefit ;
2. We respect every customer as our friend and we sincerely do
business and make friends with them, no matter where they come
from.
3. We provide effecient after sale-service. We can also send
technician to support the installation.
