W shape cheap price SZH Dry Powder double conical mixing Machine
for foodstuff industry
Principles:
1. heat source pass through the sealed jacket
2. the heat will be transmitted to the raw material to be dried
through inner shell
3. under driving of power, the tank is rotated slowly and the raw
material inside it is mixed continuously. then the purpose of
reinforced drying can realized
4. the material is at a vacuum state, the drop of steam jpressure
makes the moisture at the surface of raw material become saturation
and will evaporate
5. the solvent will be discharged through vacuum pump
6. the inner moisture of raw material will infiltrate, evaporate
and discharge continuously. these three processes are carried
continuously and the purpose of drying can be realized within a
short time
Technical Parameters
| Model | SZG-100 | SZG-350 | SZG-500 | SZG-750 | SZG-1000 | SZG-1500 | SZG-2000 |
| Total volume (L) | 100 | 350 | 500 | 750 | 1000 | 1500 | 2000 |
| Loading volume (L) | ≤50 | ≤ 175 | ≤ 250 | ≤ 375 | ≤ 500 | ≤ 750 | ≤ 1000 |
| Rotary speed (r/min) | 3-13 |
| Motor power (kw) | 0.75 | 1.1 | 1.5 | 2 | 3 | 3 | 4 |
| Rotary height (m) | 1.75 | 2.1 | 2.25 | 2.49 | 2.8 | 2.94 | 2.99 |
| Tank inner pressure (Mpa) | -0.1-0.15 |
| Clip set pressure (Mpa) | ≤ 0.3 |
| Working temp.(°C) | Inner tank ≤ 85 Clip set ≤ 140 |
| Heating media | Steam, Hot water, Heat transfer oil |
| Weight (kg) | 800 | 1100 | 1200 | 1500 | 2800 | 3300 | 3600 |
| Floor area (L*W) | 2160*800 | 2260*800 | 2350*800 | 2550*1000 | 2860*1300 | 3260*1400 | 3760*1800 |
Note: because the raw material exist in difference, the output in
the table is for reference only
Features
1. The mixing barrel is a W-shaped double-tapered cylinder, and the
material is 304-2B high-quality stainless steel plate ring formed
by round and close welding, which is more conducive to cleaning the
barrel after the material is mixed. Both the inner and outer walls
are precisely polished and polished, with smooth surface, no dead
ends, thorough discharge, and easy cleaning;
2. The transmission system is composed of motor, reducer, sprocket,
bearing, transmission shaft and other parts. There is no noise in
the working process, smooth operation, no jitter, and no
eccentricity;
3. The feed port is a DN350 manhole, and the seal is made of edible
silicon rubber sealing strip, which is pollution-free and easy to
operate
4. The frame of the mixer is made of channel steel, which is welded
firmly, and the outer frame of the frame is made of 304-2Bδ1.5mm
stainless steel. The surface is flat, without scratches, and no
welding traces. The side of the rotating bracket electrical control
is a movable door for easy maintenance;
5. The discharge port of the barrel is installed with a DN150
stainless steel sealing butterfly valve, which has good sealing
effect and convenient operation;
Application
It is suitable for the raw materials that need to concentrate, mix and dry at low temperature(eg. biochemistry products in chemical, pharmaceutical and
foodstuff indusries).
1. materials that are easy to oxidize
2. materials that are easy to volatilize
3. materials that having strong heat sensitive or toxic
4. materials that should not destroy its crystal in drying
Pre-service:
As a good and rich experience supplier, we should offer customer
the best quality and best price of the machine.
1. Introduce the suitable product to the customer in detail, answer
the question raised by customer carefully.
2. Make the suitabe project as the customer requirement and make
sure the machine is suitable for the material.
Sale service:
(1). Ensure product with high quality and pre-commissioning before
delivery. (2). Delivery on time. (3). Provide full set of documents as customer’s requirements.
After-sale service:
Provide considerate services to minimize clients’ worries.
1. Assist clients to prepare for the first construction scheme.
2. Install and debug the equipment.
3. Train the first-line operators.
4. Examine the equipment.
5. Take initiative to eliminate the troubles rapidly.
6. Provide technical support.
7. Establish long-term and friendly relationship.
Service commitment:
1. Provide clients one-year warranty to make sure the machine work
well.
2. We always keep certain inventory level of spare parts, which
means the replacements can be sent to you timely.
3. Send every client a preferential quotation.
Jiangsu Shengman Drying Equipment Engineering Co.,Ltd, established
in 2011, known as a local leading high-tech enterprise, is located
in Zhenglu town, Changzhou, Jiangsu, China. Shengman is a
large-scale production enterprise in China drying industry with a
registered capital of 35,000,000 RMB, specialized in designing
&manufacturing various kinds of dryers, granulators, mixers,
grinders ,dust removers, etc. Shengman owns an area of over
200,000㎡, and realizes annual sales of over 70,000,000RMB for
consecutive years. Shengman has passed European Union CE
authentication, ISO 9001 quality management system certification
and got good bank credit for AAA. Now Shengman has been one of the
largest drying equipment production enterprises in East China and
keeping leading the drying industry’s development.
