KJG sludge dewatering hollow paddle sticky material dryer drying
equipment
Blade dryer for the W-type shell, the shell of the general
arrangements for 2-4hollow stirring shaft. Shell with a sealed
cover with the cover to prevent dust leakage and collection of
materials, solvent vapor materials. Set out and exit pull a block,
to ensure a high degree of materials level, so that heat transfer
surface is cover with fully materials. Heat medium through the
rotary joint, passing through the shell jacket and the hollow
stirring shaft, hollow shaft stirring according to the type of
thermal media have different internal structures to ensure the best
heat transfer.
Technical parameters
| Model | KJG-2.7 | KJG-24 | KJG-52 | KJG-81 | KJG-110 |
| Heat transfer area | 2.7 | 24 | 52 | 81 | 110 |
| effective volume | 0.06 | 1.53 | 3.96 | 6.43 | 9.46 |
| revolution | 15-30 | 10-20 | 10-20 | 5-15 | 5-10 |
| power | 2.2 | 11 | 30 | 55 | 95 |
| width of dryer body | 306 | 1118 | 1474 | 1828 | 2210 |
| total width | 736 | 1474 | 1854 | 2286 | 2668 |
| length of dryer body | 1956 | 3454 | 5258 | 6020 | 6122 |
| total length | 2972 | 6147 | 8306 | 9678 | 9880 |
| distance between feeding and disharging | 1752 | 3150 | 4954 | 5562 | 5664 |
| height in center | 380 | | 1066 | 1220 | 1220 |
| total height | 762 | | 2032 | 2464 | 2668 |
| steam inlet | (2) 3/4 | (2) 1 | (2) 11/2 | (2) 11/2 | (2) 2 |
| water outlet | (2) 3/4 | (2) 1 | (2) 11/2 | (2) 11/2 | (2) 2 |
Application
This dryer is widly used in pharmaceutical industry, foodstuff
industry, chemical industry and etc. Especially be sutiable for the
following materials:
1. Pulpiness, paste-like mixture or powder materials.
2. Thermal sensitive material which required to be dried at lower
temperature.
3. Material that are easy to oxidize or explode and the material
that have strong irritative or toxic.
4. Material that required recoverying solvet.
Low Operation Cost
- Easy to operate
- Requires minimal attention
- Simple instruments monitor the process
- High efficiency
- Low off-gas volume
Low Maintenance Cost
- Designed for high torque and low operating speed
- Simple durable design for easy and low maintenance
- No internal parts to adjust or maintain
- No metal to metal contact
- Shafts, pillow block bearings, and drive components are designed
for long life under adverse conditions, insuring long term
mechanical integrity
- Robust frame supports split pillow block bearings
- Grease-purged stuffing boxes. Alternate seal designs are
available
Low Installation Cost
- Designed with compact structure
- Small off-gas system
- Vertical shaft removal reduces building size requirements
FAQ
Q: How can I visit your factory?
A: Our company is in Changzhou city, and it is very near Shanghai
city. It takes about 1 hour to get to Changchou. Or we can even
visit you in Shnghai.
Q: What’s the quality of your products?
A: Our products come with best quality, and passed CE
certification. And exported to lots countries around the world,
such as Australia, Malaysia, Vietnam, Philippines, Korea, Brazil,
Argentina, Russia, South Africa, etc. You can rest assured with the
quality absolutely.
Q: What to do if the machine has a problem?
A: 24 hours timely response of mail and phone calls. If the parts
broken belong to non-artificial factors within 12 months, we offer
free replacement. If beyond 12 months, customers should bear the
freight back and forth and accessories cost.
Q: How long is the warranty of your equipment?
A: One year.
Q: What is your payment term?
A: Our usual payment term is: 30% TT in advance, 70% TT before
shipment. Other ways can also be received after we both sides
discussion and agreement.
Q: Does your price include freight?
A: Our usual price is based on FOB Shanghai. If you request CIF,
please give us your delivery port, and we will give you CIF price.
