Small Water Bottle Moulding Machine , Energy Saving High Speed
Machine
1. This series is widely used for making PET bottles for drinking
water, carbonated soft drink, medium temperature filling drink,
milk, edible oil, food, pharmacy, daily chemical……etc.
2. The man-machine interface is highly automated and easy to
operate. The compact machine occupies a smaller area.
3. The servo motor is adopted to drive the molding mechanism,
triggering off a bottom mold linkage as well. The whole
mechanism works speedy,accurately, stably and flexibly. Meanwhile,
it is energy efficient and environmental safe.
4. The thermostatic heating system ensure that the heating
temperature of each preform surface and internal is uniform. Hinged
oven holders make it easy for the operators to change infrared tubes and do
maintenance.
Machine Technical Parameter
| Items | Unit | Model |
| BLMS-9000 |
| Molding Spec. | Cavity Pitch | mm | 76 |
|
| Preform Heating Pitch | mm | 76 |
| No.of Cav. | Cav. | 6 |
| Container Spec. | Max.Container Volume | L | 0.6 |
|
| Neck Diameter Range | mm | 18-38 |
|
| Max.Containr Diameter | mm | 70 |
|
| Max.Containr Height | mm | 240 |
|
| ※※Theoretical Output | bph | 10000~9000 |
|
| Power Spec. | Rated Power | KW | 88 |
|
| Power Consumption | KW | 45~55 |
|
| Compressor Spec. | Blowing Pressure | Mpa | 2.5~3.2 |
|
| Air Consuming | m³/min | 7~8 |
|
| Whole Machine Spec. | Size | mm | 5191*4864*3200 |
|
| Weight | Kg | 5500 |
|
| Note: Due to continuous technical development specification would
be improved without prior notice. |
| Special designs correspond to customers needs. |
