Hot Sell Small Size Ultrasonic Flow Meter Flowmeter Flow Watch
I. INTRODUCTION
ML-F8 is very unique in its structural design. It uses a circular
magnetic steel to achieve automatic connection during
installation.It takes only 2-3 minutes to complete the whole
process from installation to measurement. It also adopts the
current popular OLED display, which makes it easy to read in low
light conditions.
II.FEATURE
- Clamp on type, no need to cut the pipe or do any other changes.
- No professional product knowledge required, installation and
measurement can be done based on the guide.
- No moving parts or pressure changes involved, installation can be
done without stop provide.
III. SPECIFICATION
Model: ML-F8
Velocity Range: 0.1 m/s ~ 5.0 m/s
Accuracy: ± 2.0%
Repeatability: 0.80%
Analog output: 4~20mA, Maximum load: 600Ω
Alarm output: OCT, Upper and lower limit alarm function (for
option)
Communication: RS485,support Modbus communication protocol
Power Supply: 24VDC
Cable Length: 1.8m
Keypad: Four light touch buttons
Screen: OLED 128*64 screen display
Units: Metric and imperial units are available
Cubic Meters(m3), Liters(L),USA Gallons(GAL)/hour, USA
Gallons(GAL)/min
Default unit setting: m3/h
Totalizer: Six bit digit
Piper Material: Stainless steel pipe, carbon steel pipe, PVC
Case Material: Aluminum alloy
Environment Temp.:0℃-50℃
Medium Temp.:0℃-50℃
Environment Humidity: 0-95% relative humidity, without condensation
IV. PIPE SPECIFICATION
| Size | DN15 | DN20 | DN25 | DN32 | DN40 | DN50 |
Nominal Pipe
Diameter Size | 15mm | 20mm | 25mm | 32mm | 40mm | 50mm |
| Pipe OD | 20mm | 25mm | 32mm | 40mm | 50mm | 63mm |
| Pipe ID | 15mm | 19mm | 26mm | 33mm | 43mm | 55mm |
| Inch | 1/2’’ | 3/4’’ | 1’’ | 1.2’’ | 1.5’’ | 2’’ |
V. INSTALLATION STEPS
VI. Application
ML-F8 also satisfies different clean fluid measurements: various acids,
alcohols, chemical solvents,alcohol, beverage water, Coca-Cola
water, etc.
