40W to 200W High Lumen LED Road Lights for Residential Area and
Factories
Decription
LED Street Light
Power: 40W,60W,80W,100W,120W,150W,200W
Input: AC100-347V
Pole Connector: φ60/φ50mm
Ambient Temperature: -40 degrees to 50 degrees
Adopted the high power LED Light source which is independent
researched and integrated packaging, equipped with light
distribution system high strength tempered woven glass, thus making
the lamp irradiation scope, intensity of illumination, evenness
completely meet the requirement of city the City Road Lighting
Design Standard
Pioneering radiator and lamp shell integration design, LED is
closely connected with shell directly, through the shell cooling
wing and air convection, it fully ensures the LED street light's
life span to 50000 hours. According to the calculation for working
12 hours a day, the life also can cover 10 years, the maintenance
cost is extremely low
Light shell adopts the aluminum alloy die-casting molding which can
be effective cooling, waterproof and dustproof. The light surface
is treated with the ultraviolet radiation resistant and corrosion
resistant. The IP rating can up to IP65
Environment friendly and no pollution. No mercury, lead or other
harmful elements. High stability with no pollution to the air. They
are the real environmental friendly products
Simple installation. The light has two installation ways, vertical
installation and level installation
Feature
This Lamp is composed of the bottom case of electrical box, front
cover, small cover, heat sink, light source module, lens, power,
and upper cover of the electrical box.
Good heat dissipation effect by the air convection
Eutectic welding without gold thread, to avoid the phenomenon of
break and dead light
Good color rendering index, no flicker, green and energy saving,
and environmental protection
LED driver based on intelligent constant current technique,
prolonging the life
The light has been widely used in the road and square etc
Installation
When you install the light, the first step is to fix the lamp on
the street lamp pole through the lamp installation bracket. Connect
the null wire, the earth wire, the live wire of the cable wire with
the power system according to the requirements (there is connection
mark). After checking, connect the electricity, then the street
lamp can work normally. The specific installation steps are as
follows:
1, Open the back cover, fixt the lamp through pressing plate of the
pole, and fix the lamp in the pole
2, connect the wires according to the connecting mark
3, Close the back cover, fix it with the clip. Please note not to
press the cable
Package and Delivery
Package: Carton box
Port: Shenzhen, Shanghai
Delivery: 3-5 days for samples
10-15 days for big quantity orders
Speficiation
| Model | Input | Packing Size | Working Temperature | Electric Safety Class | LPW |
| AN-LD4032-40-A-08 | AC100-347V | 723 x 182 x 385mm | -40 ～ 50℃ | Class I | 130LM/W |
| AN-LD5032-60-A-08 | AC100-347V | 723 x 182 x 385mm | -40 ～ 50℃ | Class I | 130LM/W |
| AN-LD5032-80-A-08 | AC100-347V | 723 x 182 x 385mm | -40 ～ 50℃ | Class I | 130LM/W |
| AN-LD5032-100-A-08 | AC100-347V | 723 x 182 x 385mm | -40 ～ 50℃ | Class I | 130LM/W |
| AN-LD6032-120-A-08 | AC100-347V | 815 x 182 x 385mm | -40 ～ 50℃ | Class I | 130LM/W |
| AN-LD6032-150-A-08 | AC100-347V | 815 x 182 x 385mm | -40 ～ 50℃ | Class I | 130LM/W |
| AN-LD7032-200-A-08 | AC100-347V | 907 x 182 x 385mm | -40 ～ 50℃ | Class I | 130LM/W |
Other Choice
| Model | Power | Input | LPW | PF | CRI | Ip Grate |
| AN-LD4032-40-A-08 | 40W | AC100-277V | 120LM/W | >0.95 | >70 | 65 |
| AN-LD5032-60-A-08 | 60W | AC100-277V | 120LM/W | >0.95 | >70 | 65 |
| AN-LD5032-80-A-08 | 80W | AC100-277V | 120LM/W | >0.95 | >70 | 65 |
| AN-LD5032-100-A-08 | 100W | AC100-277V | 120LM/W | >0.95 | >70 | 65 |
| AN-LD6032-120-A-08 | 120W | AC100-277V | 120LM/W | >0.95 | >70 | 65 |
| AN-LD6032-150-A-08 | 150W | AC100-277V | 120LM/W | >0.95 | >70 | 65 |
| AN-LD7032-200-A-08 | 200W | AC100-277V | 120LM/W | >0.95 | >70 | 65 |
Light Distribution
Picture
Our Service
Your inquiry related to our products or prices will be replied in
24 hrs
Well-trained and experienced staffs to answer all your enquires in
fluent English
OEM & ODM, any your customized lightings we can help you to design
and put into product
Distributer are offered for your unique design and some our current
models
Protection of your sales area, ideas of design and all your private
information.
Discount are offered based on order quantities
