89mm 114mm HDPE Conveyor Roller Conveyor Idler Roller With Rust
Inhibitors
76mm /89 mm /114mm /133mm Dia Rubber Lagging Impact Conveyor Idler
Roller
For those who are often in contact with the construction industry,
they have a certain understanding of this Impact roller group, but
for people in other industries, they are unfamiliar with this
product. The characteristics are also unknown. In fact, the
products produced by each Impact roller group manufacturer have
their unique characteristics.
Under normal circumstances, the cross section of the Impact roller
is hollow, and its function is also used to transport air or some
fluids. For example, we are familiar with natural gas, water, oil
and gas, which are commonly used in daily life. Of course, some
Solid fuel can also be transported through this Impact roller set
channel.
The impact conveyor roller production process is as following:
1.Pipe Cutting: After the treatment, the pipes are cut into fixed
length;
2.End Boring: In this step, boring is processed. With our automatic
double end boring machine, we make sure that the roller pipe is
treated under the same level;
3.Bearing Welding: Two bearings are pressed into the pipe, and
welded together with the pipe;
4.rubber: As cutomers requirement we will make rubber lined, rubber
rings or rubber coated on the pipe.
5.Shaft Cutting: Similar to the pipe cutting process, the shafts
are cut into same length and the section is flat;
6.Shaft Milling: At this stage, the shaft is treated at two ends,
making into the flat ends;
7.Final Assembling: In this last step, the pipe and the shaft are
pressed into a steel tube conveyor roller with the automatic press
assembling machine.
conveyor roller parameter
| Pipe diameter/mm | Roller Dia(mm) | Length Scope(mm) | Shaft Dia(mm) | Bearings Type(Min-Max) | Roller's TubeThickness |
| 60 | 72 | 150-2500 | 20; 25 | 204 | We can make as your request |
| 60 | 89 | 20; 25 | 204 |
| 76 | 89 | 20; 25 | 204 205 |
| 76 | 108 | 20; 25 | 204 205 |
| 89 | 108 | 20; 25 | 204 205 305 |
| 89 | 133 | 20.25 | 204 205 305 |
| 89 | 127 | 20;25 | 205 206 305 |
| 89 | 152 | 20; 25 | 204 205 305 |
| 108 | 133 | 20; 25; 30 | 205 206 305 306 |
| 108 | 159 | 20; 25; 30 | 205 305 306 |
| 133 | 159 | 20; 25; 30.35 | 205 206 207 305 306 307 |
| 133 | 194 | 20; 25; 30; 35 | 205 206 207 305 306 307 |
| 89 | 116 | 20; 25 | 207 305 306 307 308 |
| 89 | 120 | 20; 25 | 204 205 |
Product Description
1. Roller idlers Dia 89mm-219mm, length 150-3500mm, which are used
in the steel industry, harbor, coal industry, power industry,
cement industry, etc
2. Tube: Q235
3. Shaft: 45# STEEL
4. Bearing: Double Row Deep Groove Ball Bearing 2RS&2Z with C3
clearance.
5. Seals: Grease retaining inner seal with Multi-stage Labyrinth
and Retention Cap with Outboard
Rubbing Flinger Seal.
6. Lubrication: Grease is Lithium soap type grease with Rust
Inhibitors.
7. Welding: CO2 gas shielded arc welding end
8. Painting: ordinary painting, hot galvanized painting, electric
static spraying painting, baked painting
