AS2000 Dental Air Ultrasonic Scaler Handpiece 2holes 4holes With 3pcs EMS Woodpecker Tips

Dental Ultrasonic Air Scaler Handpiece 2holes / 4holes With 3pcs EMS Woodpecker Tips

Product information of Dental Ultrasonic Scaler

1. Easily attachable to any 2-hole and 4-hole borden handpiece connector.
2. The air supply must be free of moisture.
3. The air supply must be free of moisture.
4. Installation of scaler tip and operation:
a. Holding the tip-end, turn clockwise and fasten securely tighten with wrench.
b.Shout off the water supply.
c. Adjust air pressure to 2.8KG/CM2
d. Adjust the water flow until a fine mist ejects from the tip.
5. Air drive, and directly connect onto 2/4 holes tube of dental unit, very easy to adjust the air pressure according to all kinds
of your requirements;
6. Supply 2-3 drips into the drive air tube once or twice a day or spray lubricant into inlet hole of H. P. For about two seconds.
7. Compare to market level, the working noise level skip down and feels more comfortable

At present, we are dealing on seven categories like dental equipment, dental orthodontic series, dental supplies, dental material, dental decoration and dental accessories etc, amounts to more than six hundreds kind of products, such as NSK/KAVO dental handpiece, woodpecker brand of curing light and apex locator series ect. autoclave, water distiller, ultrasonic Scaler, orthodontic arch wire and bracket, dental study model, dental chair etc.

Contact Information:

tel/wechat/whatsap:008615136820854

And we are expecting to support OEM

FAQ:

1. How to place the order?

Please send inquiry to us. We will help you confirm the products and the quantity you need, and send you

the invoice and payment information.

We can accept the payment by T/T, Paypal and .

2. Can you provide samples? Are the samples free?

For small products, such as endo files, dental burs, acrylic resin teeth, retractors, and other small materials,

we can provide free sample, but the buyer need to pay the freight in advance.

3. How about the warranty?

For non-consumable products, like dental chair, X ray unit, ultrasonic scaler etc, we can provide one year warranty.

Please provide photo or video to describe the problems, we will suggest solutions or send spare part. Shipping cost

will be undertaken by the buyer.

4. Do you have CE or FDA for your products?

Yes, most products have CE and FDA certificates. Our products have been exported to many countries successfully.

Our company has a broad range of over 160 reliable and high performance products: acrylic resin teeth, dental chair, dental hand piece, ultrasonic scalar, light cure, ENDO motor, teeth whitening unit, X-ray and so on.

Our products are CE approved.