Full Automatic Packaging Machine For Pvc Pipe And Profile / Pvc
Pipe Auxilliary Machines And Parts
Full Automatic Packaging Machine For Pvc Pipe And Profile / Pvc
Pipe Auxilliary Machines And Parts Application:
Suitable pipe diameter range: Ø20-Ø32mm
Packing method: online packing
Full Automatic Packaging Machine For Pvc Pipe And Profile / Pvc
Pipe Auxilliary Machines And Parts Main Technical Parameters:
| PPR pipe automatic strapping and bagging sewing packaging machine
(PPR single layer) (the length of the packaging part is 7.2 meters,
both ends are sewn and sealed) |
| Suitable pipe range | Ø20—Ø32mm |
| Strapping film material and thickness | LLDPE stretchable film,
|
| Strapping film width | 50 mm |
| Bundled stretch film plastic core inner diameter | 40 mm |
| Strapping film outer diameter | 140 mm |
| Number of winding loops of stretch film | 3 turns (adjustable) |
| Number of strapping sections | The pipe length is less than or equal to 3000 mm for three
sections, and more than 3000 mm is for four sections, which can be
adjusted according to actual conditions. |
| Bundling and winding position | 150mm±50 at each end of the pipe, the middle of the pipe is
automatically calculated and implemented after the pipe length is
set. |
| Packing bag material | Woven bag |
| Bag folding width | 237mm(0~+10) |
| Bag paper core inner diameter | 76mm |
| Outer diameter of bagging roll | 800mm |
| Packing method | winding and binding, bagging, sewing at both ends |
| Pipe counting method | Mechanical baffle counting and weighing and counting double
counting function with weighing sensor at both ends of stainless
steel trough simultaneously counting to ensure accurate counting |
| Labeling method | One end of the bag is sewn with the label |
| Bundling data |
| Nominal outer diameter(mm) | Packing quantity (strip/tie) |
| Ø20 | 30 |
| Ø25 | 20 |
| Ø32 | 10/12 |
| Packing pipe length | 4m |
| Packing cycle per bundle | 150 seconds |
| The packaging qualification rate | over 99% (the rate of regular sewing and sealing is 90%)
|
| Overall dimension L×W×H | 12000mmX1500mmX1952mm(the length of the packaging part is 7 meters) |
Full Automatic Packaging Machine For Pvc Pipe And Profile / Pvc
Pipe Auxilliary Machines And Parts Equipment configuration and brand
| Machine Name | Part Name | Brand |
| Pipe Automatic Machine | Geared motor with brake | Shengbang |
| PLC | Inovance |
| Frequency converter | Inovance |
| Driver | Inovance |
| servo motor | Inovance |
| Main electrical components | Schneider |
| Bearing | NSK or SKF |
| Cylinder | Punan |
| Electromagnetic valve | Yadeck |
Full Automatic Packaging Machine For Pvc Pipe And Profile / Pvc
Pipe Auxilliary Machines And Parts Terms & conditions
1. Training and services
1) Instruction of field installation
2) Equipment field debugging and trial run if required by the buyer
according to the rule.
3) Training on field operation and maintenance for customer's
personnel.
4) Provide technical consultation service on long-term basis.
2. Installation and debugging
When the machine arrives at site, the customer should install it on
the appropriate position according to the specifications provided
by the supplier; and then the supplier should send its engineers to
the site if requirement approved,in order to instruct the customer
about trial run and debugging. The customer should provide
necessary conditions for trial run and provide materials for trial
run, and should decide the processing conditions in trial run with
consideration of the supplier's opinions.
1) The price covers the pre-commissioning of the machinery before
shipment at Seller's site. The Seller is obliged to test the
performance of machinery.
2) The Buyer is obliged to provide suitable space, tools and
manpower for the commissioning of the order.
3) This Price does not included commission and installation in
buyer’s factory.
3. Pricing
1) The above mentioned quotation is valid within 30 days counted
from the issue date of quotation.
2) The price and machinery configuration should be updated and
confirmed by the Seller in the case that the quotation has been
beyond the validity period.
3) The above mentioned quotation is based on Ex works. Sea
transportation and wooden case packing is excluded.
4) The price does not cover the cost of testing material. The
testing material will be supplied by the Buyer. Or the Seller will
purchase the material as requested by the Buyer at Buyer's cost.
5) The price does not include the cost of commissioning at Buyer's
site.
The Seller reserves the right to modify the specification and
design of the machine in order to enhance the product quality.
4. Terms of payment
1) T/T and L/C (irrevocable, at sight) both are acceptable.
2) 35% of the total contract value should be paid in advance,
balance 65% of the total value is to be paid before shipping at the
Seller’s factory.
5. Time of delivery
1) When the contract becomes valid, the machine should be delivered
within 60 days since receipt of the advance payment. And the
equipment will be in normal operation after debugging within two
weeks after arrival.
2) During production, provided that the Buyer requests to modify
the specification of the order, the Buyer shall notify the Seller
of this modification in written form. Upon receipt of the notice,
the Seller will quote to the Buyer the cost of this modification
and notify the Buyer of any possible delay due to this
modification.
6. Debugging charge
The buyer pays for the plane ticket of round-trip abroad and food
and accommodation of buyer’s country during debugging. And the wage
of technicians should be paid by the customer (80USD/day).
7. Guarantee clause
1) Guarantee is 1 year (excluding human factor and wearing parts).
2) Under proper working conditions, 12 months from the date of
completion of commissioning at the buyer's site, and should be at
the latest within 14 months from the issuing date of Bill of
Lading.
