Gym Intelligent Speed Gate Turnstile With Rfid Swing Barrier

Fast Speed Gate Intelligent turnstile gates With Access Control Rfid Swing Barrier For gym

Features of Swing Speed Gate:

• Support bi-directional opening
• Can integrate with access control system.
• Trigger to open by dry contact. Automatic close back after auto timer elapsed. Delay time can be programmed on swing barrier control panel.
• Trigger to open by dry contact (NC) and close by dry contact (NO). This allowed access control reader to control swing barrier opening and closing time.
• During power failure, swing barrier will automatically open up to allow free access. When power resume, swing barrier will automatically close back to resume security level.
• Built in clutch that will automatically disengage motor drive from gearbox when the gate is obstructed. Clutch release reduce impact force to minimum in the event that gate closed onto passing users. This also protect the motor and control panel from being damaged due to overload.
• Optional safety IR beam can be added to auto reverse the gate upon detecting obstacle in the passage way. This way the gate is reversed before even hitting user that is still in the passage way. More safety to the user.
• Gate length can be easily customized to fit site requirement.
• Auto synchronized opening when 2 swing barriers are installed for the same passage. Both side will open and close at the same time.
• Gate motor mechanism is self lock at open and close position.

Features and Benefits

1. The running status can be programmed and controlled with the built-in keyboard on the main board.
2. Mechanical anti-pinch function. If the gate meets resistance in the reset process, motors will stop working automatically within the prescribed time and reset again after the default delay (till fully reset).
3. Anti-breakthrough function. The gate is locked automatically until opening signal received.
4. Synchronization functions (for dual gate equipments).
5. Automatic reset function. Should the user fail to pass within the prescribed time (default time is 5 seconds), the system will cancel the authority of the current user automatically.
6. Gate can be set as normally open or normally closed.
7. Can be used with variety of card readers: IC / ID card readers, bar codes, fingerprints, etc. (Access controller needed)
8. Direction can be set as single-direction or bi-direction.
9. The device can be connected to management computer to realize remote control and management.
10. LED direction indicator.
11. Gate auto opens when power off and auto close when power on, complying with fire safety requirements.
12. Alarm function, in case of illegal intrusion and reverse intrusion, etc.
13. Counter function (optional).
14. Support infrared photocell for anti-pinch and reset function.

Specifications

Application areas:
Office space: business buildings, government agencies (prisons, detention centers), etc.

Science and education units: institutions of higher learning, research institutes, kindergartens, libraries, etc.

Commercial service places: supermarkets, business buildings, hotels, banks, concert halls, convention centers, etc.

Leisure and entertainment venues: stadiums, parks, scenic spots, playgrounds, leisure clubs, etc.

Transportation site: bus station, railway station, high-speed rail station, subway station, ferry port, airport, etc.

Bester (Foshan Bester Smart Access Co.,Ltd) is the enterprise integrating intelligent machinery and electronic technology in road safety machines.
Our main products are turnstile, automatic turnstile, tripod turnstiles, full height turnstiles, sliding gate operators, swing gate operators, flap barriers,

swing barriers, speed gates, automatic barrier gate(barrier, barrier gate, boom barrier, automatic barrier, traffic barrier, car park barrier, road barrier) for car parking lot.
The company have experience with more than 15 years, have been sold to more than 100 countries and regions. The company has sold more than 150,000 units a year.
Besides, we are also professional on providing OEM/ODM service for overseas customers, warmly welcome you to visit our factory and hope we can work together to supply you our high-quality system, offer you the factory cost price, provide you the best service, looking forward to serving you in the near future.