Y09-010 Laminar Flow Test Cleanroom Fogger In Pharma Factory

Cleanroom Fogger Clean Room Laminar Flow Test In Pharma Factory

Cleanroom fogger can meet a wide range of applications, such as purification workshops of class 100 and above. This small, easy-to-use tool can show the airflow and turbulence in the control area using only DI water. The spray output is about 60 degrees Fahrenheit, a single fan blows 4CFM of fog, lasts about 50 minutes, switch controls the spray, 100-10000 level purification workshop uses 16 megohm DI water, 1-10 level purification workshop needs 64 megohm DI water

The specification of cleanromm fogger

1. Voltage: AC 220V

2. Power: 250W

3. Optimum capacity of water within the tank: 3.6 liter

4. Product size: 310 × 209 × 210 mm (length × width × height)

5. Net weight: 8 Kg, weight with water: 12Kg

6. Fogging amount: ≥1700ml / h

7. Atomized particle size: 1-10 micrometers

Applications of cleanroom fogger
1. Clean room laminar flow test (especially suitable for use in pharmaceutical factories)
2. Airflow balance test
3. Optimization of the wet cleaning and discharge system
4. Test of exhaust system of chemical treatment equipment
5. Verification of personal safety discharge system
6. Pressure balance inside and outside the room
7. Leak test of air duct

Company Information

Suzhou Sujing Automation Instrument Equipment Co., Ltd. (herein after referred to as Sujing Instrument) is boasting the largest market share in the particle measurement field in China, with complete integration of scientific research, development and production.

Sujing Instrument is one subsidiary company of Sujing Group.(Sujing Group has 11 subsidiary companies)

Sujing brand has been granted the honor of "China Famous Brand" since 1983. Sujing Group has been keeping the first place among competitors in the same industry for 35 years in a row.
The mission of Sujing Instrument is to provide products and services accociated with particle measurement and monitoring, which are application driven.

Sujing instrument is an ISO 9001:2015 Registered Company

Suzhou Sujing Automation Instrument Equipment Co., Ltd. is specializing in the particle contamination measurement field in China, with complete integration of scientific research, development and production.

Sujing Instrument is one subsidiary company of Jiangsu Sujing Purification Group Co., Ltd. Sujing Group is one of China's strongest state-controlled businesses and the largest domestic bases for solutions in technological innovation, manufacturing and projects of air and gas purification and energy saving environmental protection technology. Sujing Group is a new & high technology enterprise and one of 520 nation key enterprises in which Jiangsu Research Center and post-doctoral workstation are set. Sujing Group is a "National Innovative Pilot Enterprise" and a "National High and New Technology Enterprise" with a national enterprise technology center and a post-doctoral research work station built inside.

The mission of Sujing Instrument is to provide products and services accociated with particle measurement and monitoring, which are application driven. Sujing instrument is an ISO9001 registered company

Sujing instrument are available in the form of standard models, special designs and complete systems.

Service are available in the form of calibration, special engineering and application assistance.

Sujing instrument is committed to continually enhancing and expanding our products and service.

Office

Research

Warehouse

Production

Testing