4HA230C-08 Airtac Type Manual Air Control Valve 5 Way 3 Position
Hand Lever Valves are used to operate Pneumatic Cylinders. In the
absence of electrical supply, manually operated valves such as Hand
Lever Valves are used. The functioning is the same, however, the
solenoid coil is replaced by a hand lever, which controls the
movement of the spool inside the valve, thereby allowing the air to
pass.
Product Features:
1. Valve Type: 3 position 5 way hand lever valve.
2. Durable: Aluminum alloy valve body, wearable and pressure
resistant, lasting to use.
3. Manual Control: Black lever switch makes it convenient to
control the valve by hand.
4. Easy to Use: Compact and lightweight structure, easy to install
and use.
5. Stable Performance: Precision manufacturing, good airtightness,
stable and reliable performance.
Technical Data of 4H series Hand Lever Valve:
| Model | 210-06 | 230-06 | 210-08 | 230-08 | 310-08 | 330-08 | 310-10 | 330-10 |
| Fluid | Air (to be filtered by 40μm filter element) |
| Operating | Manual control direct acting type |
| Port Size | In=Out= Exhaust=1/8'' | In=Out=1/4'', Exhaust=1/8'' | In=Out= Exhaust=1/4'' | In=Out=3/8'', Exhaust=1/4'' |
| Orifice Size (Cv) | 4H210-08: 17.0 mm² (Cv=1.0) 4HA230C-08: 13.6 mm² (Cv=0.8) | 4H310-08: 28.0 mm² (Cv=1.65) 4HA330C-08: 21.3 mm² (Cv=1.25) |
| Valve Type | 5/2 way | 5/3 way | 5/2 way | 5/3 way | 5/2 way | 5/3 way | 5/2 way | 5/3 way |
| Pressure Range | 0 to 1.0 MPa (0 to 145 psi) |
| Proof Pressure | 1.5 MPa (215 psi) |
| Temperature | -20 to +70℃ |
| Body Material | Aluminum Alloy |
| Operating Angle | ±15° | ±8.5° | ±15° | ±8.5° | ±18° | ±10° | ±18° | ±10° |
Ordering Code of 4H series Hand Lever Valve:
Dimension of 4H series Hand Lever Valve:
Inner Structure of 4H series Hand Lever Valve:
Production Video of BRANDO Pneumatic Valves:
More Pneumatic Products for you to choose:
| 2/2 Way Pneumatic Valves | 3/2 Way Pneumatic Valves | 5/2 Way Pneumatic Valves | 5/3 Way Pneumatic Valves |
| | | |
| Namur Solenoid Valves | FRL Unit | Pneumatic Cylinders | Silencers and Fittings |
|  |  |   |
Focus on your demands, Offer you best solution:
√ Contact us if some points you have doubt
√ Contact us if somewhere need to change
√ Contact us if not the one you are looking for
√ Contact us if you are doing designing
Welcome to your any question and inquiry!
