CA76MM MM Seires 3'' Inch Submerged Dust Collector Diaphragm Valve
The blowing air volume of the electromagnetic pulse valve is the
key to determining how many filter bags (filtering area) can be
cleaned, but it is not scientific to judge its cleaning ability
only from the blowing volume of the electromagnetic pulse valve.
Because some pulse valves cannot be closed in time and the blown
air volume increases, it has no effect on the dust removal of the
filter bag except for increasing the consumption of compressed gas
and wasting energy. For a pulse valve with good performance and
quality, its blowing air volume is also restricted by many factors
in the cleaning system: from the input end of the pulse valve, the
volume and pressure of the gas distribution box, and the supply of
the gas distribution box The inner diameter of the air pipe and the
air supply capacity of the air source directly affect the blowing
performance and blowing air volume of the same pulse valve: on the
load end of the electromagnetic pulse valve, that is, the filter
bag it blows, the temperature of the dusty gas that it filters,
Humidity, dust concentration, specific gravity and viscosity,
filtration speed, equipment resistance will all put forward
different requirements for blowing performance and air volume. The
number and structure of nozzles (nozzles), filter bag material,
diameter, length and quantity, and dust removal. Various factors
such as form (online, offline), dust removal control (timing,
constant pressure difference), etc., all affect and restrict the
injection performance and dust removal effect of the pulse valve to
varying degrees.
Video On Youtube About CA76MM 3'' Solenoid Pusle Valve:
Technical Data of CA76MM Manifold Mount Pulse Valve:
| Model No. | CA76MM |
| Port Size | G3 Inch |
| Nominal Size | 76mm |
| Number of Diaphragm | 2 |
| Working Media | Air |
| Working Pressure | 0.3~0.8Mpa |
| Working Temperature | -5~+55℃ |
| Body Material | Aluminum Alloy |
| Seal Material | NBR(common, all available) |
| Voltage | AC220V, AV110V, AC24V, DC24V |
Special voltages and special specifications, please contant us.
Overall Dimension:
Details About CA76MM Submerged Pulse Valve:
Construction:
Body and Dreeser Nuts: Aluminum (diecast)
Ferrule: 305 Stainless Steel
Armature: 430FR Stainless Steel
Diaphragm and Seals: Nitrile or FKM
Spring: 304 Stainless Steel
Screws: 302 or 304 Stainless steel
Outlet Pipe: Schedule 40 wrought steel zinc passivated
Diaphragm Seat: PA-66 (25 & 40MM standard), Nitrile-coated mild
steel (76MM standard), Acetal (102MM standard) or Vitoncoated mild
steel
Maintenance Kits of CA76MM Valve:
| Model | Nitrile | FKM | Incldes |
| CA/RCA76MM | K7600 | K0384 | Diaphragm kits include main and secondary diaphragms and all spring |
| k0380 | | O-ring, armature assembly, armature spring, ferrule |
Focus on your demands, Offer you best solution:
√ Contact us if some points you have doubt
√ Contact us if somewhere need to change
√ Contact us if not the one you are looking for
√ Contact us if you are doing designing
Welcome to your any question and inquiry!
