Profiler Surface Contour Measurement Machine
Features:
The best balance of performance and cost, with the best
price/performance ratio.
★ High precision digital contour sensor.
★ Large-scale high-precision contour measurement, micro-profile
measurement.
★UNIMETRO innovatively uses a new type of digital sensor that
delivers up to five times better linear accuracy than traditional
digital encoder sensors and up to 10 times the ability to measure
small contours!
★This measure enables the new SP2000 series profiler to meet the
requirements of large-scale measurement while also evaluating the
small contour of the surface of the part. Typical applications
include deep groove ball bearings, peach dog bearings, and ball
screw grooves. Measurement of the R value, configuration deviation,
and Pt value.
Profiler Surface Contour Measurement Machine Measuring Functions
● Dimensions: including horizontal distance, vertical distance, linear distance,
radius and diameter
● Included angle: including horizontal angle, vertical angle and included angle
● Position tolerance: including parallelism and perpendicularity
● Shape tolerance: including straightness, convexity and arc profile
● Auxiliary generation: including auxiliary points, auxiliary lines and auxiliary circles
Profiler Surface Contour Measurement Machine Measuring Range
| Item | Measuring range | Resolution |
| Driver | 120mm | 0.2μm |
| Sensor | 50mm | 0.05μm |
| Column | 420mm | - |
Profiler Surface Contour Measurement Machine Techinical
Specifications
| Technical specifications | Linear accuracy1 | ±(0.8+|0.15H|)μm |
| arc2 | ±(1.5+R/12)μm |
| Angle3 | ±1′ |
| Straightness4 | 0.5μm/100mm |
| Motion control | X-axis drive mode | Electric |
| Z-axis drive mode | Electric |
| X-axis drive speed | 0.05~15mm/s |
| Z-axis drive speed | 0.2-15mm/s |
Note: 1. H is the measurement height in the horizontal position; 2.
The included angle of the sampling arc is 120 ° for the standard
ball of 2mm < R < 10mm; 3. The sampling length of the corner
edge is 5mm for the angle block of 60 ° and 90 ° respectively; 4.
The λ C is 2.5mm, and the measurement speed is ≤ 0.3mm/s; 5. For
the standard ball with 2mm < R < 10mm, the included angle of
circular arc is 120 ° 6. The above parameters are measured under
the environment of 20 ℃ ± 5 ℃ and the step temperature is not more
than 2 ℃ / h 7. The maximum ground vibration RMS < 50 Hz 2.5 μ M
/ S / > 50 Hz 5.0 μ M / s.
Profiler Surface Contour Measurement Machine Configuration
Machine:
Integrated ergonomic machine cp-mp2
Specification: 500 * 800
Column:
High speed column cp-cn-wr
Maximum moving speed: 15mm / S
Minimum moving speed: 0.2mm/s
Positioning accuracy: 0.005mm
Low noise driver cp-d-ssom
Contour straightness: 0.3 μ M / 100 mm
Roughness residual value: ≤ 0.005 μ M
Maximum moving speed: 15mm / S
Minimum moving speed: 0.05mm/s
Sensors:
Low noise digital contour sensor cp-ztr-chpd
Linear accuracy: ± (0.7 + | 0.05h |) μ m
Measuring force: 0.7g
UNIMETRO Company Information
FAQ:
Q: Are you a factory or trading company ?
A: We are a factory and giving you the quickest reply in 24 hours.
Q: What's your company mainly in?
A: We are mainly produce Vision measuring machine,Coordinate
measuring machine ,CMM&VMM fixturesetc.
Q: How to Choose the Appropriate Specification?
A: As long as you tell us variety and size of product to be
measured, our professional team would advise you of measuring
instrument of suitable specifications.
Q: Do you accept customized service?
A: Be sure! We can provide not only typical machines, but also the
machines customized to customer's needs.
Q: What is your warranty period?
A: Our product warranty period is 1 year. Our product quality is
very stable, and we have improved a lot on some breakable parts.
You can rest assured of our product quality.
