10kA Power Connection Box , Lightning Protection Box Impulse Counter Function

10kA Parallel Connection Box, Lightning Protection Box For The Main Power Entrances

This product is mainly designed for direct lightning or induced lightning protection at the main power entrances or main distribution cabinets of various facilities in high thunderstorm areas, and effectively clamps the line overvoltage generated by lightning strikes to avoid electrical system or equipment damage.

*With up to 300kA (per phase) surge discharge capacity, longer service life and no frequent maintenance during the life cycle*. The product adopts NEMA 4X (hard plastic) or NEMA 4 (metal) optional grade waterproof box, external standard 3/4 inch NPT waterproof cable connector, can be used for indoor and outdoor installation nearby.

*Support most of the current domestic and international power distribution systems and grounding forms, which are convenient for customers to choose; and adopt full-mode protection design to make over-voltage protection safe and reliable. Optional sine wave tracking function, which can more effectively attenuate high-frequency interference or spikes in AC power.

* Equipped with highly sensitive lightning event counting device and digital display, phase power working and protection status LED indication *, and remote signal alarm signal lead, convenient for customers to effectively monitor and maintain.

Feature

1.Comply with GB18802-11/IEC61643-11, and UL1449 and other international and domestic standards
2.Using Puth's high-performance PTMOV as the core lightning protection component, it has excellent voltage protection level and fail-safe performance. In the event of a power distribution system failure (TOV), the protection module (PTMOV) can safely exit the grid to avoid various failures caused by Faults, such as grid failures or even electrical fires, etc.
3.Full mode protection (L-N, L-PE, N-PE, L-L), to provide protection for all possible lines through which the surge current passes, common mode overvoltage and differential mode overvoltage can be effectively suppressed, and protection level distortion is avoided.
4.Optimize parallel redundancy technology to realize module current sharing. The current flowing through each module (PTMOV) decreases as the number of parallel connections increases, so the product has a longer life expectancy and is more effective in resisting short-term multiple lightning strikes or high-intensity lightning currents . When a module is damaged or aging due to lightning strikes, the module automatically exits the protection sequence without affecting the overall protection function of the product, so the protector does not require frequent maintenance during the life cycle *.
7.Optimized internal structure design, and due to the excellent characteristics of PTMOV, the product is compact and saves installation space
8.With failure LED display, and alarm function.
9.Built-in lightning event monitoring device to accurately record the frequency of lightning or surge events.
10.IP65 (or NEMA4, 4X) waterproof housing, suitable for indoor and outdoor installation.

Scope of application:

The second-level lightning protection box is mainly installed in the floor power distribution, computer room power distribution and other environments, as the second-level lightning protection of the power distribution system, discharges the remaining surge, and cooperates with the first-level lightning protection box to meet the lightning protection acceptance Requirements and protection needs.

Product Description:

Adopting Class II SPD to combine “3+1” circuit, protecting low voltage equipment from surge damages, applied in TT system, designed according to IEC61643-1/GB 18802.1
Main character:
1. Green light indicates normal and red light indicates fault for operation

2. Built-in circuit breaker, and thermal disconnection device, when the fault occurred, the thermal disconnection device will cut off the SPD from the power net, the green window will change
3. Impulse counter function, recording the lightning events
4. External wiring terminal, easy for connection, suitable for indoor application

Guangdong uchi Technology Co., Ltd. has been rooted in the lightning protection industry for more than ten years. It specializes in lightning protection device maintenance technical services and lightning protection scheme design. The company has a rich product line and covers a wide area, which can quickly meet the diverse needs of different customers for lightning protection services. 

Our company's lightning protection and maintenance business involves many fields:

1. Transportation industry: high-speed toll stations, high-speed monitoring, airports, railways, ports, etc.;

2. Water conservancy industry: hydrological stations, dams, pumping stations, water companies, etc.;

3. Education industry: school teaching building, school computer room, student dormitory building, etc.;

4. Medical industry: pharmaceutical factories, hospitals, precision medical equipment, etc.;

5. Financial industry: banks, securities companies, insurance companies, etc.;

6. Petrochemical industry: oil production plants, oil depots, refueling stations, chemical plants, etc.;

7. New energy industry: wind power generation, photovoltaic power generation, booster station, etc.;

8. Construction industry: new (renovated) and expanded buildings, residential buildings, office buildings, shopping malls, etc.

Our company has a group of highly skilled service teams, and the strong technical force has become the strong backing of the company's excellent project quality. The company always insists on customer first, eliminating hidden dangers is our bounden duty, and safeguarding safety is our mission philosophy. We wholeheartedly serve all sectors of the society and create a safe production and living environment free from thunder and lightning.