Intelligent Control Entrance And Exit Pedestrian Passage RGB LED
Indicator Swing Arm Turnstile
PRODUCT DESCRIPTION
The swing barrier gate is an intelligent control device for the
entrance and exit of the pedestrian passage.
The swing barrier gate is a part of the entrance management system,
combined with computer and access
control system, attendance system, ticketing system, which can
realize various of functions for different scope.
Advantage of swing gate is the channel width can be extend easily,
support motor bike bicycle and wheelchair pass.
SN-SB01 is the minimum optical swing barrier gate, single working,
lower air freight cost for sample order,
with LED indicator for access, and optical swing can be extended
according to project requirement.
Technical Specifications
| Description | Parameter |
| Framework | SS304 |
| Dimension | Colunm diameter:168mm |
| Power supply | AC 220V/110V±10% |
| Motor voltage | DC24V (Brush-less motor) |
| Access device input | Dry contact |
| Optimal flow rate | 25 to 30 person/minute |
| Gate swing angle | 90 deg per side |
| Gate opening/closing speed | 1s |
| Reset time when power on | 3s |
| Arm material | Transparent acrylic/ SS304 |
| Default arm length | 530mm |
| Arm max. bearing | 30KG |
| Working environment | Indoor/outdoor with shelter |
| Working temperature | -15°C~80°C |
| Relative humility | ≤95%, Non condensation |
| Communication interface | RS485 standard(distance ≤ 1200m) |
Our advantage:
The stylish stainless steel column and clear toughened glass wing
present a bright and concise design.
Bi-directional opening facilitates fast and safe access. It can
also be integrated with recognition systems
for user friendly access control.
Featured with high security and stability, it’s suitable for banks,
corporate headquarters, airports and leisure venues.
Application
The brush-less anti-collision swing barrier is an intelligent
passage management equipment developed
and produced by our company. It integrates the exquisite mechanical
transmission, microprocessor
control, voice and various reading and writing technologies. By
configuring different reading and
writing equipment, the intelligent control and management of the
passage can be completed. The
machine can realize the public channel's dissuade and access
control
Product photos:
Features:
1. Stainless steel housing, rain-proof laser opening, novel and
beautiful.
2. LINIX (the best micro-motor brand in China) brush-less DC motor
is used and the surface is electroplated.
3. Length of arm: 500mm to 800mm.
4. Fault detection and alarm functions, easy to use and
maintenance.
5. The running status can be programmed and controlled with the
built-in keyboard on the main board.
6. Mechanical anti-pinch function. If the gate meets resistance in
the reset process, motors will stop working
automatically within the prescribed time and reset again after the
default delay (till fully reset).
7.Anti-breakthrough function. The gate is locked automatically
until opening signal received.
8. Synchronization functions (for dual gate equipment).
9.Automatic reset function. Should the user fail to pass within the
prescribed time (default time is 5 seconds),
the system will cancel the authority of the current user
automatically.
10. Gate can be set as normally open or normally closed.
11. Can be used with variety of card readers: IC / ID card readers,
bar codes, fingerprints, etc. (Via dry contact signal)
12. Direction can be set as unidirectional or bidirectional.
13. The device can be connected to management computer to realize
remote control and management.
14. LED direction indicator (optional)
15. Gate auto opens when power off and auto close when power on,
complying with fire safety requirements.
16. Support infrared photocell for anti-pinch and reset function.
