Silicone Rubber Base and Curing Agent
High strength RTV-2 Mold Making Silicone Rubber
DESCRIPATION
Silicone rubber MCSIL-2025 is a two-component material, consisting
of Part A base and Part B MCSIL-CA30, cures at room temperature by
a condensation reaction.
APPLICATIONS
MC RTV-2 mold making silicone rubber are suited for reproduction of
cement molding, concrete stones, artificial stones, plaster
molding, figures, art objects, decoration molding, GRC products, gypsum products, resin products, PU molds, etc.
Product Features
1. Good flow ability and long working time
2. Medium hardness
3. High tear and tensile strength
4. Easy de-mould from complex replica parts
5. Acid and alkali-resistance
6. Low linear shrinkage
Using Instruction
1- Take 100g of part A and add 2g of part B and mix the silicone
rubber and curing agent evenly.
2- vacuum pumping
Without exception, this step takes less than 10 minutes. Otherwise,
it will cause , and no more further steps will be available
3- Pouring mold or block mold of silicone rubber
The pouring way is an easy way to make molds, it's slowly and
evenly pour into the mixed silicon rubber into the square frame.
After the cross linking reaction.
Packaging & Shipping
Part A base silicone: 5kg, 20kg/drum, 25kg/drum or 200kg/drum
Part B CA30 Curing Agent: 250g, 800g/bottle, 1kg/bottle
Storage & Shelf life
When the silicone rubber is stored at or below 30 centi degree in
the original unopened containers, Silicone Base and Curing agent
have a usable life of 10 months from the date of production. After
10 months stockpiles use the Stir to mix the Part A silicone for
some minutes, then the silicone can be use again, no influence for
other performance.
