Low Heat Release Yellow Resistance Crystal Clear Epoxy Resin For
Making Diy Arts And Crafts
Product description
Epoxy Resin 400-4AB is a TOP coat Food grade epoxy resin that cures
under normal and low temperature conditions. It has good leveling,
natural defoaming, low viscosity, high hardness and high strength.
It can be cured at room temperature or by heating. Dedicated to
crystal drop board, marble board, 3D floor insulation, metal floor,
kitchen countertop, resin coating, high hardness coating on any
surface; and other electronic parts, moisture-proof potting, secret
masking, etc.
Advantages
High water clear appearance
High hardness
High gloss
Easy application
Easy to clean
Main Applications
Rhinestone beads
Man made diamond
Man made jewelry
Souvenir
Operation
1. Weigh A and B glue according to the given weight ratio into the
prepared cleaned container, fully mixed the mixture again the
container wall by clockwise, place it along for 3 to 5 minutes, and
then it can be used.
2. Take the glue according to the usable time and dosage of mixture
to avoid wasting. When the temperature is below 15 oC, please heat
A glue to 30 oC first and then mix it to the B glue (A glue will be
thicken in low temperature ); The glue must be sealed lid after use
to avoid rejection caused by moisture absorption.
3. When the relative humidity is higher than 85%, the surface of
the cured mixture will absorb moisture in the air, and form a layer
of white mist in the surface, so when the relative humidity is
higher than 85%, is not suitable for room temperature curing,
suggest to use the heat curing.
Lab Equipment
