Solenoid Valve Connectors Valve Plug Male Base C Type Rectangular
Ip65 Waterproof Auto
1. Solenoid valves are used wherever fluid flow has to be
controlled automatically
2. They are being used to an increasing degree in the most varied
types of plants and equipment
3. The variety of different designs which are available enables a
valve to be selected to specifically suit the application in
question
4. Solenoid valves are control units which, when electrically
energized or de-energized, either shut off or allow fluid flow
5. The actuator takes the form of an electromagnet. When energized,
a magnetic field builds up which pulls a plunger or pivoted
armature against the action of a spring
6. hen de-energized, the plunger or pivoted armature is returned to
its original position by the spring action
7. Solenoid Valve Connectors Connect hydraulic and air-powered
valves, motors, pumps, and pressure switches
8. IP65 rated connectors protect against water projected from a
nozzle.
9. Solenoid Valve Cables and Connectors Reduce wiring time with
over-molded solenoid valve cables available in sizes to fit all
NITRA directional solenoid valves
General Details
Contacts: 2+PE 3+PE
Connector design: base
Connector locking system: central bolt
Termination: screw clamp
Wire gauge (mm): min. 0.34 mm², max. 1.5 mm²
Wire gauge (AWG): 18
Upper limit temperature: 100 °C
Lower limit temperature: -20 °C
Electrical values
Rated current (40 °C): 10 A
Rated voltage: 250 V
Rated impulse voltage: 4000 V
Pollution degree: 3
Overvoltage category: III
Insulating material group: III
Volume resistivity: ≤ 15 mΩ
Insulation resistance: ≥ 10¹⁰Ω
EMC compliance: not shielded
Degree of protection: IP65
Mechanical operation: > 50 Mating cycles
Material
Contact material: CuSn (bronze)
Contact plating: Ni (nickel)
Contact body material: PA (UL 94 HB)
Housing material: PA
| Connector insert | TPU |
| Coupling nut/screw | Brass with nickel plated |
| Connector contacts | Brass with Gold plated |
| Standard | Industrial standard |
Product Photos
1. Q: What is the necessary information needed for quotation?
A:The series(M5/M8/M10/M12/M23),coding,male or female,pin
number,cable length.
2. Q: What is the minimum order quantity(MOQ)?
A:100 pcs or negotiatable.
3. Q: What do the Finecables certifications have?
A: ISO9001:2008, ISO14001, CSA.
4. Q:What does Finecables can provide for the product’
certification?
A: IP67, IP69K, UL, CE and RoHS.
