Class III Type 3 Surge Protective Devices 10kA MOV SPD Three Phase
Remote & Non Remote
Class III Type 3 Surge Protective Devices 10kA MOV SPD Feature:
• Type 3 surge protective devices shall be installed as close as
possible from the sensitive equipment to protect.
• The BR-10DP series of modular surge protection devices provides
protection of equipment connected to incoming low voltage AC power
supplies against the damaging effects of transient over voltages
caused by local lightning strikes, or the switching of electrical
inductive or capacitive loads.
• Tested with a 1.2/50 - 8/20 current combination wave generator,
they ensure a very low protection level voltage value.
Class III Type 3 Surge Protective Devices 10kA MOV SPD Product
Details:
| BR30-10DP 3+1 | BR75-10DP 3+1 | BR150-10DP 3+1 | BR275-10DP 3+1 |
| SPD classification according to EN61643-11 | Type 3 | Type 3 | Type 3 | Type 3 |
| SPD classification according to IEC61643-11 | Class III | Class III | Class III | Class III |
| Nominal a.c. voltage Un | 24V | 60V | 120V | 230V |
| Max. continuous operating a.c. voltage Uc | 30V | 75V | 150V | 275V |
| Max. continuous operating d.c. voltage Uc | 38V | 100V | 190V | 300V |
| Nominal discharge current (8/20us) In | 5kA | 5kA | 5kA | 5kA |
| Combined impulse Uoc | 10kV | 10kV | 10kV | 10kV |
| Voltage protection level Up | ≤200V | ≤500V | ≤700V | ≤1100V |
| Response time tA | ≤25ns | ≤25ns | ≤25ns | ≤25ns |
| Operating temperature range Tu | -40℃-80℃ | -40℃-80℃ | -40℃-80℃ | -40℃-80℃ |
| Operating state / fault indication | green / red | green / red | green / red | green / red |
| Cross-section area (Min.) | 2.5mm2 | 2.5mm2 | 2.5mm2 | 2.5mm2 |
| Cross-section area (Max.) | 16mm2 | 16mm2 | 16mm2 | 16mm2 |
| For mounting on | 35mm Din rail |
| Enclosure material | Thermal plastic UL94-V0 |
| Degree of protection | IP20 | IP20 | IP20 | IP20 |
Dimension:
Class III Type 3 Surge Protective Devices 10kA MOV SPD Main
benefits:
• Extremely low level of protection voltage value that is suitable
for all sensitive terminal equipment.
• Connection bases can be supplied either with, or without,
additional remote indication facility
• Good value of Imax 10kA
• The BR-10DP series offers DIN rail mount connection bases
• Common and differential mode of protection
Class III Type 3 Surge Protective Devices 10kA MOV SPD Application:
• Type 3 would be fitted to a final circuit or at an item of
equipment to protect locally against switching overvoltages
• It must therefore mandatorily be installed as a supplement to
Type 2 SPD and in the vicinity of sensitive loads.
Our Services:
• 17 years global leading profession manufacture of electrical
products surge arrester.
• All products will be well packed before shipping.
• Standard packaging, and you can also tell us your own
requirements on packaging.
• Faster delivery.
• Individually Tested Prior to Shipment.
Noted:
• Type 3 surge protective devices are generally installed right in
front of the terminal device to be protected.
• Effective surge protection is not just simply installed. It has
to be individually coordinated – to the system that is to be
protected and the ambient conditions that are prevalent on site.
For this reason, the design and concept must be consistent. This
means many details must be taken into account, from considering the
standards and stipulations right through to classification
according to lightning protection zone.
• Surge protection should ensure that surge voltages cannot cause
damage to installations, equipment or end devices.
Certification:
Our factory:
Wenzhou Britec Electric Co., Ltd. an export enterprise specialized
in the manufacture of SPDs, our factory was found in 2003. Which is
located in Yueqing city, Zhejiang province, China.
FAQ:
Q1. Payment:
A: TT 30% deposit in advance and the balance before shipping.
Q2. Delivery time and methord:
A: Usually within 30 days.
Q3. Port of loading:
A: Shanghai or Ningbo port, China.
Q4. MOQ:
A: 100PCS.
Q5. Package:
A: Standard export packing--Carton.
