High Efficient Horizontal Glass Washing Machine
LIJIANG GLASS- FOR WORLD GLASS MACHINE USER SERVICE
Horizontal Glass Washing Machine with Soft Low e Brushes LJWBQJ2500
Automatic Horizontal Glass Washing and Drying Machine LJWBQJ2500
used for cleaning and drying the upper and lower surfaces of
ordinary plate glass and high quality low-e glass,it is composed of
incoming segment, cleaning air-drying segment and out goingsegment.
Structural characteristics:
This cleaning machine adopts horizontal structure, which is used
for cleaning and drying plate type glass;
-The main part consists of inlet, cleaning, drying, and out of film
-Conveyor adopts chain transmission
-The machine has 1 water tank. primary washing
-There are 4 groups of brushes and 3 groups of absorbent cotton
within the machine
-Reliable, good cleaning effect, easy to adjust;
-Conveying glass Frequency Control, easy to control, is more
conducive to connect the bilateral edging production lines, glaze
line, insulating glass production line, safety glass production
lines
-special cleaning requirements or attached features can be
customized
- the transmission adopts gear transmission, variable frequency
speed regulation, digital display, easy to operate, it is conducive
to connecting the production line
- the cleaning department and the wind cadres overall lifting, the
highest lift is 400mm, easy to clean the internal rubber roller and
maintenance
- by three to two on the hard brush brush cleaning, in front of the
available cylinder lifting, cleaning all kinds of Low-e glass on
soft brush with third.
- wind cadres use professional design of two pairs of wind knife,
wind knife wind dry better effect!
| Maximum glass width | 2500mm (effective maximum: 2650mm) |
| Minimum glass specification | 400mm×400mm (limited to single row on left and right sides) |
| Glass thickness | 3mm-25mm (digital display) |
| Speed range | glass thickness within 3-25mm Vmax=1-12m/min |
| Main drive, brush speed regulation method | frequency control |
| Table height | 900±25mm |
| Total power | 42KW(water-bearing wind heating: 15KW) |
| Water source | self-circulation, tap water (according to civil water standards)
and deionized water water supplement (deionized water equipment
shall be provided by the buyer) |
| Power source | 380V 50Hz |
| Dimensions (length × width × height) | approximately 6260*4800*3100 |
| Weight | 3940kg |
LIJIANG GLASS- FOR WORLD GLASS MACHINE USER SERVICE
other product:
1.Spacer Bending Machine
2.Automatic Desiccant Filling Machine
3.Low-E Glass Edge Remover Machine
4.Silicone Sealant Sealing Robot
5.Manual Belt Grinding Machine
