SKLN Factory Using High Efficiency Animal Feed Pellets Cooling
Machine
Introduction of feed pellets cooling machine:
SKLN feed pellets cooling machine is mainly using for cooling 2-8mm
diameter pellets, when outlet from pellet machines, the hot pellets
temperature is about 60-80 centigrade, after using the feed pellets cooling machine, the temperature is not higher than room temperature +3-5.
The feed pellets cooling machine adopts counter flow theory, cold air goes inside of cooler from
bottom and then go out from top, hot pellets goes to cooler from
top to bottom, as time goes on, pellets will pulse at the cooler
bottom, cold air will cool them at the bottom gradually, in this
way will reduce pellets broken, if cold air also go to cooler from
top, which same as pellets, then hot pellets will meet with cold
air suddenly ,then pellets will be easily broken, especially
pellets surface broken easily. So the feed pellets cooling machine can cool fully and equally, pellet broken rate is smaller than
0.2%.
The SKLN feed pellets cooling machine generally works with cyclone and air fan, air lock. which is used
to clean dust, also it can install a screener at the cooler bottom,
which can separate dust and good pellets after cooling.
Mainly Parameter of feed pellets cooling machine:
| Model | Power (kw) | Capacity (t/h) | Cooling time (min) | Cooling temperature(℃) | Dimension (mm) |
| SKLN-1.2 | 1.5+0.25 | 0.8-1 | no less than 6-10 min | No higher than room temperature +3-5℃ | 1750X1600X1960 |
| SKLN-1.5 | 1.5+0.25/1.5+1.5 | 1-2 | 1600X1800X2600 |
| SKLN-2.5 | 2.2+0.55/2.2+2.2 | 3-5 | 2000X2100X2200 |
| SKLN-4 | 3+0.37/2.2+3 | 5-8 | 2200X2200X3000 |
Product photos of feed pellets cooling machine:
