China hot sale 1-8 ton per hour wood waste wood chips wood blocks
grinding mill machine
Product Introduction of grinding mill machine:
The motor and rotor of this series grinding mill machine installed
on the same base. They are directly connected by coupling. The
rotor has been checked by dynamic balance test can rotate in both
of forward backward direction.
There are symmetrical operation door and safety interlock in both
side. The operation doors are helpful to renewal thieve plate and
hammers, also helpful for checking up and debugging. Feed inlet is
placed in the top of crusher which can be matched with all kind of
feed equipment. There is one piece of sieve plate installed at the
bottom of wood grinding mill machine. The size of crushed material
could be changed by changing different sieve plate with different
hole. Normally, the finished size is from 2mm to 30mm adjustable. Spare parts of hammers and sieve plate are made by our CNC system,
through high technical heat treatment.
The GXP series grinding mill machine has reasonable structure,
sturdy and durable using, safety and dependable, simple
installation, easy operation, tiny vibrating, high efficiency etc.
advantages, which is the most ideal grinding equipment of all kinds
of wood chips, wood shavings, grass, straw, stalk, corn, weeds,
soybean, PVC foaming board, rubber and so on.
Mainly Parameters of grinding mill machine:
| Model | GXP65*27 | GXP65*55 | GXP65*75 | GXP65*100 | GXP80*100 |
| Diameter of rotor(mm) | 650 | 650 | 650 | 650 | 800 |
| Width of studio(mm) | 275 | 550 | 750 | 1000 | 1000 |
| Rotate speed (r/min) | 2950 | 2950 | 2950 | 1480 | 1480 |
| Spec of screener(mm) | 1340×270 | 1340×400 | 1340×600 | 2730×600 | 2730×600 |
| Spec of hammer(mm) | 180×50×5 | 180×50×5 | 180×50×5 | 180×50×5 | 180×50×5 |
| Qty of hammer(pie) | 24 | 48 | 72 | 96 | 96 |
| Related power(kw) | 22 | 55 | 75 | 90/110 | 132/160 |
| Output(t/h) | 0.5-1 | 1-2 | 2-3 | 3-4/3-5 | 4-6/5-8 |
Product Photos of grinding mill machine:
