Environmental Friendly Split Air Source Heat Pump
With A wet desulfurization system and a wet desulfurization method. A generator and a waste water evaporator are arranged in a split heat pump system to continuously reduce the temperature of the sulfur-containing flue gas passing into the desulfurization tower to reduce it to below the acid dew point temperature and promote the smoke Gas SO3 condensation and small pollutants grow up for the first time. The sulfur-containing flue gas is used in the wastewater evaporator to evaporate the desulfurization wastewater, and water vapor is generated to be injected into the desulfurization tower to establish a supersaturated water vapor environment to promote the second growth of fine pollutants in the desulfurization flue gas. At the same time, a certain amount of cold and heat are produced by the generator and deep evaporator. The cold is used to purify the deep cooling of the flue gas, build a supersaturated water vapor environment, and promote the third growth of small pollutants, and the heat is used to heat the desulfurization The tower purifies the flue gas to increase its temperature and eliminate the phenomenon of white smoke. In turn, the goal of removing fine pollutants from the desulfurization flue gas, eliminating white smoke, and reducing desulfurization wastewater emissions.
Leomon heat pump allows to reduce up to 80% of the energy consumption of a house, using a renewable source of energy that minimizes the CO2 emissions to the environment.
Years of reserch and studying, Our R&D department was able to produce a very compact and easy to install heat pump keeping on it all the controls necessary to regulate your house temperature. our heat pumps is able to work in very extreme weather conditions(-30℃) keeping it's high performance.
An icing and antifreezing device for a casing heat exchanger and a
manufacturing method thereof are adopted, and belong to the field
of heat pumps. This
A tube-in-tube heat exchanger icing and anti-freezing device
includes a tube-in-tube heat exchanger composed of a concentric
inner tube and an outer tube, and a plurality of inflatable elastic
balls are arranged at equal intervals in the inner tube. The
inflatable elastic ball is a butyl rubber ball. The gas inflated
inside the inflatable elastic ball is nitrogen. Furthermore, the
inflatable elastic ball is adhered and fixed to the inner tube. The
diameter of the inflatable elastic ball is half of the diameter of
the inner tube. Furthermore, the total volume of the inflatable
elastic ball is 0.4 times the internal volume of the inner tube. It
can achieve the effects of not being easy to freeze and
anti-freezing, and has a simple structure and low cost.
Specification of Environmental Friendly Split Air Source Heat Pump
| Unit type | SJKRS-28 II/C | SJKRS-36II/C | SJKRS-55 II/C | SJKRS-73 I/C | SJKRS-106 IC | SJKRS-I60II /C | |
| Specifications | 7.5HP | 10HP | 15HP | 20HP | 30HP | 40HP | |
| Power supply | Three-phase five-wire380V/50Hz | ||||||
| Heating mode | Direct heat/cycle type | ||||||
| Standard working condition | Heating capacity( kw ) | 27.5 | 36.7 | 55.1 | 72.8 | 10.6.5 | 155.1 |
| Input Power(kW) | 6.1 | 8.2 | 13.7 | 16.1 | 23.6 | 34.5 | |
| COP | 4.5 | 4.5 | 4.5 | 4.5 | 4.5 | 4.5 | |
| Hot Water flow(m³/h) | 0.59 | 0.79 | 1.18 | 1.56 | 2.29 | 3.33 | |
| High temperature condition | Heating capacity kw ) | 23.9 | 28.5 | 51.5 | 59.5 | 89 | 13.1.5 |
| Input Power(kW) | 7.5 | 8.9 | 16.1 | 18.6 | 27.8 | 41.1 | |
| COP | 3.2 | 3.2 | 3.2 | 3.2 | 3.2 | 3.2 | |
| Hot Water flow(m³/h) | 0.27 | 0.33 | 0.59 | 0.68 | 1.02 | 1.51 | |
| Low temperature condition | Heating capacity( kw ) | 17.3 | 21.4 | 34.8 | 41.5 | 62.2 | 94.5 |
| Input Power(kW) | 6.2 | 7.6 | 12.4 | 14.8 | 22.2 | 33.8 | |
| COP | 2.8 | 2.8 | 2.8 | 2.8 | 2.8 | 2.8 | |
| Hot Water flow(m³/h) | 0.32 | 0.4 | 0.65 | 0.78 | 1.16 | 1.77 | |
| Component Information | Size of water pipe joint | DN20 | DN25 | DN32 | DN40 | ||
| Water heat exchanger | Plate or sleeve heat exchanger | ||||||
| Air Heat Exchanger | Aluminum Fin for copper tube | ||||||
| compressor type | Semi-closed reciprocating | ||||||
| Operation Panel | Color touch screen | ||||||
| Maximum outlet temperature(℃) | 90℃ | ||||||
| Refrigerants | R744 (CO2 ) | ||||||
| Design pressure(MPa) | High side 15, low side 8 | ||||||
| Dimensions (length, width and height mm) | 1450x950x1450 | 1600x950x1500 | 1850x1150x1900 | 2050x1150x1950 | 2670x1410x2150 | 2290x2270x1980 | |
| Noise (dB) | 56 | 59 | 62 | 67 | 70 | 70 | |
| Weight(kg) | 550 | 660 | 780 | 860 | 1180 | 221360 | |
| SCOPE of use | Feed water temperature(℃) | 5~ 40 | |||||
| Feed water pressure | 0.05~ 0.4 | ||||||
| Effluent temperature(℃) | 55~ 90 | ||||||
| Maximum flow | 1.2 | 1.5 | 2.4 | 3.2 | 4.9 | 6.5 | |
| Ambient temperature(℃) | ’-20~43 | ||||||
