16.5mm Wire Mesh Rolls In India Market Wire Mesh Roll Welding
Machine
Wire Mesh Roll Welding Machine Description
The machine consists of three parts,wire pay-off,main welding
machine,control cabinet.Auxiliary equipment includes repair
welder,repair table,spooling machine,wire frame,pay-off stand.The
machine is full automatic.It belongs to multi spot welding
machine.All the cross welding points on the weft wire are welded at
one time.The welding efficiency is high.The mesh will be rolled
automatically while welding.The worker only need to cut the mesh
and unload the roll from the machine.
Wire Mesh Roll Welding Machine Advantage
1. The welding electrode is made of high chromium copper with good
conductivity, wear resistance and long service life.
2. The electronic components are of famous brands with low failure
rate. You can also specify the brand according to the customer's
requirements.
3. The main welding machine includes wire feeding part,welding
part,rolling part,welding reansformer,spiny shaft.
4. The width of the net is within the widest width of the machine
and can be adjusted at will.
5. There is a certain range of wire diameters that can be welded by
the machine.
Wire Mesh Roll Welding Machine Application
The finished welded wire mesh can be widely used in mining,
commerce, transportation, construction (walls with nets, floor
heating network), decorating, landscaping protection, all sectors
of the fence, concrete roads, airport runways, tunnels, bridges,
pipelines communication, water conservancy, power plant, dam,
harbor, river beware wall, warehouses and other types of
construction of the reinforced concrete structure with a net.
Roll Mesh Welding Machine
Wire Pay-off: Put the material onto the wire pay-off. When the
machine is welding, rotate the feeding to ensure smooth feeding
Pay off stand: This device is for fine wire diameter.This is for
warp wire feeding.
End roll mesh
