2000LPH EDI System RO Water Purification Equipment UV Sterilization

2000LPH EDI System RO Water Purification Equipment EDI Water Treatment Plant

Specification

Function of each ro water treatment part

1. Raw water pump-- provide the pressure to silica sand filter/ active carbon filter

2. Silica Sand filter -- get rid of turbidity, suspended matter, organic matter, colloid and so on

3. Active Carbon filter--Remove the color, free chloride, organic matter, harmful matter and so on
4. Softener--reduce the hardness of water
5. Micron filter--prevent any deposition of large Particles, most of the bacteria, and viruses into the RO membrane, The
accuracy is 5um, for holding back any large particulates such as large iron, dust, suspended matter, impurity.
6. High pressure pump-- Provide the high pressure to RO membrane (at least 2.0 M pa).
7.RO system--RO system is the main part of pure water treatment plant. The RO membrane's desalt rate can reach as

high as 99%, it is capable of removing over 99% of ions, bacteria, particles and 98% of organin.

Ro edi water treatment system Features
1. Our company's RO reverse osmosis equipment adopts key components, equipment adopts imported brand
2. advanced technology, reliable quality, strong expandability, reasonable structure and small area
3. high water utilization rate, low energy consumption, fully automated operation, simple operation and maintenance .
3. According to user requirements design and manufacture of reverse osmosis system,
4. The general production limit of 0.25m3/hr, the upper limit is not limited, the water recovery rate can reach more than 75%, salt rejection rate> 98%.
5. The amount of water produced varies with the temperature of the incoming water and the aging or contamination of the reverse osmosis membrane.

Pictures